Microstructural stability of ODS steels in cyclic loading
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
An argon gas atomized, pre-alloyed Fe-14Cr-2W-0.3Ti (wt.%) reduced activation ferritic (RAF) steel powder was mechanically alloyed with 0.3wt.% Y2O3 nano-particles in an attritor ball mill and consolidated by hot isostatic pressing at 1150 °C under a press ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
The paper presents the microstructure and mechanical properties of an oxide dispersion strengthened (ODS), reduced activation, ferritic steel, namely the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) alloy, which was fabricated by hot isostatic pressing followed by high sp ...
This thesis investigates nine new compositions of the ternary Au-Cu-Pt system, containing from 75 to 78 wt% Au with 0 to 15 wt% Pt, by means of in-situ synchrotron radiation X-ray diffraction, differential scanning calorimetry, transmission electron micros ...
According to various studies, Grain Boundary Engineering (GBE) is likely to enhance mechanical properties of polycrystalline materials. The present investigation highlights some relationships between thermomechanical process (TMP) parameters of a commercia ...
This article describes the microstructure and Charpy impact properties of an Fe-14Cr-2W-0.3-Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS)-reduced activation ferritic (RAF) steel, manufactured either from elemental powders or from an Fe-14Cr-2W-0.3Ti p ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Oxide dispersion strengthened steels based on the ferritic/martensitic steel EUROFER97 are developed. The reinforcing particles dispersed in the matrix of EUROFER97 are made of yttria and yttrium titanium oxides. Microstructure is investigated by transmiss ...
Polycrystalline zirconia (3Y-TZP grade) unreinforced and reinforced with multiwalled carbon nanotubes (CNTs) or silicon carbide whiskers (SiCw) or silicon carbide particles (SiCp) have been processed and studied by mechanical spectroscopy with complementar ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
