Storage of Renewable Energy by Reduction of CO2 with Hydrogen
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The aim of this work was to operate the steam reforming of methanol and the total oxidation of methanol in a microstructured two-passage reactor. The steam reforming enables the production of hydrogen at relatively low temperatures (250 °C) with only a sma ...
The use of ammonia as a source of hydrogen for fuel cells has received little attention until now. Ammonia offers several advantages over hydrogen as a fuel and is produced commercially in massive quantities and as a biogas. This paper describes the result ...
Polymer electrolyte and solid oxide are the two fuel cell types (PEFC, SOFC) under development in Switzerland. The very distinct operating temperatures of 80 °C (PEFC) and 800–950 °C (SOFC) impose fundamentally different requirements upon the nature of the ...
Due to the limiting amount of fossil fuel available and to the continuous growth of the world energy consumption, it becomes important to find alternative energy sources. Hydrogen produced by the photoelectrolysis of water is a perfect candidate as a clean ...
The cationic organometallic aqua complexes formed by hydrolysis of [(C 6H6)RuCl2]2 in water, mainly [(C6H6)Ru(H2O)3]2+, intercalate into sodium hectorite by ion exchange, replacing the sodium cations between the anionic silicate layers. The yellow hectorit ...
Correctly controlling a fuel cell system and maintaining correct operating conditions, particularly under dynamic load variations, is difficult without advanced, multivariable control systems. In order to design and implement such controllers, an appropria ...
Hydrogen prodn. using earth abundant metals is one of the important challenges facing an energy economy based upon solar fuels. Schemes that incorporate the photo-oxidn. of water must also include schemes for efficiently converting released protons and ele ...
Environmental transmission electron microscopy was used to characterize in situ the reduction and oxidation of nickel from a Ni/YSZ solid oxide fuel cell anode support between 300-500°C. The reduction is done under low hydrogen pressure. The reduction init ...
The goal of this project would be to study the thermochemical production of hydrogen by using woody biomass as a raw material. The thermo-economic performance of the process will be evaluated and an optimisation will be performed to define the optimal syst ...
Environmental transmission electron microscopy was used to characterize in situ the reduction and oxidation of nickel from a Ni/YSZ solid oxide fuel cell anode support between 300-500°C. The reduction is done under low hydrogen pressure. The reduction init ...
