In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The study considers the prediction of the entrained liquid fraction in adiabatic gas-liquid annular two-phase flow in vertical pipes. Nine empirical correlations have been tested against an experimental data bank drawn together in this study containing 150 ...
Bone is considered in two different composite mechanics frameworks: first as an organic inorganic two phase composite, and second as a fluid-saturated porous solid. Experimental data from previous studies, in which the mechanical responses of bone or colla ...
We demonstrate that irradiation may enhance the plasticity in metallic glasses by increasing the free-volume content via micropillar compression experiments on an ion-irradiated bulk metallic glass (BMG). Results show that irradiation decreases the flow st ...
The Haasen plot (inverse activation area 1/Delta alpha vs. offset flow stress sigma-sigma(s)) for solute-strengthened alloys is usually assumed additive, 1/Delta alpha = 1/Delta alpha(s) + 1/Delta alpha(f), with 1/Delta alpha(f) similar to beta(sigma-sigma ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
In order to better understand the microstructure that forms during laser welding of an 18 carat gold and an austenitic stainless steel, solidification of the Au-Fe binary analog has been studied using thermal analysis and interrupted Bridgman experiments. ...
This paper presents numerical simulations of annular laminar film condensation heat transfer in micro-channels of different internal shapes. The model, which is based on a finite volume formulation of the Navier-Stokes and energy equations for the liquid p ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2009
The formation of feathery grains during semi-continuous casting of Al-alloys [1, 2] is an interesting problem from both practical and theoretical points of view. These structures are formed by a lamellar sequence of twinned and untwinned regions separated ...
The microstructural evolution of an Al-01 wt% Cu alloy was investigated during solidification at constant cooling rate by in situ synchrotron X-ray microtomography with a resolution of 2.8 mu m. Solidification of this alloy leads to a coarse dendritic micr ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
