Reconfigurable Antennas for Beam-Space MIMO Transmission with a Single Radio

MIMO techniques allow remarkable improvements in the reliability and/or transmission rate of wireless communication systems. However, there are several major challenges towards the implementation of conventional MIMO concept in terminals with size, cost, and power constraints. Firstly, insufficient space impedes the design of efficient and decorrelated MIMO antennas. Second, MIMO traditionally demands each antenna to be fed by its own RF chain, which in turn results in greater hardware complexity, larger power consumption, and higher implementation cost. Among all reduced-complexity and antenna-decoupling schemes proposed so far, the so-called beam-space MIMO has attracted a great deal of interest as a potential solution for addressing both problems concurrently. The key idea therein is to engineer the radiation pattern of a single-feed antenna structure for each symbol period, such that multiple independent symbols directly modulate a predefined set of orthogonal virtual patterns in the far-field, therefore allowing true MIMO transmission using a single RF chain and a compact antenna structure. More important in practice, the transmitted information can be retrieved using a conventional MIMO receiver. However, the transformation of this idea into reality entails dealing with various practical aspects that are commonly overlooked in theoretical and conceptual developments. This dissertation explores the beam-space MIMO concept from the perspective of the antenna engineering, and aims at addressing several key issues associated with the actual design and implementation of beam-space MIMO systems. The early developments of beam-space MIMO concerned switched parasitic arrays. However, the requirement of utilizing several physically-separate radiators is inconvenient for practicable implementation in compact portable devices. To solve this problem, a single-radiator load-modulated antenna solution is proposed in this dissertation. Another primary challenge consists in emulating high-order modulation schemes such as PSK with realistic hardware. Here, an efficient beam-space MIMO strategy is developed, which allows transmitting PSK data streams of any modulation order using only purely reactive reconfigurable loads, and without the need for a symbol-rate dynamic matching network. The approach is illustrated by the design and fabrication of a realistic antenna for QPSK signaling. The performance of a beam-space MIMO system which utilizes the fabricated antenna is then investigated through over-the-air experiments, and compared with conventional MIMO in realistic environments. Embedding information in the radiation patterns, beam-space MIMO systems are expected to be inherently prone to multiplexing performance degradation in the presence of external field perturbation. This makes the study of near-field interaction influence on beam-space MIMO distinct from those carried out for the case of conventional systems. This issue is considered for the first time in this dissertation. Moreover, like any reconfigurable system, a beam-space MIMO system may suffer from bandwidth expansion of the transmitted signals. The final part of the work is directed towards this important issue. To reduce out-of-band radiation effect, a solution based on shaping the time-domain response of the reconfigurable components is presented. The studies presented in this thesis constitute a crucial step towards MIMO with simpler and cheaper hardware for real-life terminals.

Design of novel radiating elements for SATCOM phased arrays in Ku-Band

Baptiste Fernand Hornecker

The present thesis deals with the design of a planar antenna array for the communication between a civil aircraft (Dassault's Falcon) and an Inmarsat satellite. The final goal is to provide high speed Internet access in X/Ku-Band (8-12GHz / 12-18GHz), and possibly even in K/Ka- Band (18-27GHz / 17-40GHz). The study starts with the Ku-Band only, then evolves towards the transmission band and finishes with their Ka-Band counterparts. The main constraint of the thesis is that the final result should be a low profile antenna that will be easy to integrate below the fuselage of an aircraft. At the same time, the antenna has to provide a beam steering mechanism in order to track the position of the targetted satellite while the aircraft is moving. The usual way to achieve it is to implement some dedicated electronic chips below each radiating element of array. Dassault Aviation has its own alternate and more mechanical oriented solutions. Since the communication system is intended for top-notch business jets produced in small series, cost is not here a decisive criterion. This thesis assumes the existence of the beam-steering system and concentrates on a proof of concept and careful design of the antenna elements that will constitute the final array. They have to satisfy tight constraints in terms of size, return loss, mutual coupling with neighbors, efficiency, radiation pattern and dual circular polarization quality. Printed multilayer antennas have been retained as the best candidates, and themain parts of the thesis have been dedicated to their study. The thesis concludes with the presentation of an apparently completely unrelated and independant topic, namely the simulation of nanoscale 2D planar structures based on Graphene. The rationale for this last chapter is to provide a prospective study of the use of Graphene to create a variable capacitance. This component is always needed in the beamforming network of reconfigurable and scanning arrays. Our laboratory is developing a deep knowledge of the electromagnetic properties of Graphene-based devices and these varicaps could lead to very interesting applications in high frequencies, once the Graphene technology has definitely progressed. Thanks to electrostatics Green's functions, a variable capacitor based on Graphene has been simulated, and a Quantumeffect -the Quantum capacitance of Graphene- has been successfully tackled from a numerical point of view.

EPFL2016

Optimization of an acoustic leaky-wave antenna based on acoustic metamaterial

Sami Driss Karkar, Hervé Lissek, Seyyed Hussein Seyyed Esfahlani

In recent years, an increasing number of pioneering studies have been carried out in the field of acoustic metamaterials, following the path of electromagnetic metamaterials. These artificial engineered materials are designed in such a way so as to achieve new macroscopic properties, like negative refraction, that are not readily present in nature. While the design and the fabrication of these artificial materials is a hot topic among scientists in different fields of physics such as photonic, electromagnetic, acoustic and recently mechanic, an important part of the scientific research is now oriented towards the identification of actual applications for these structures. As the novel idea of metamaterial was first developed in the electromagnetic realm and for the microwave frequency range, it is somehow more mature in these fields than in acoustics. Metamaterial applications are now widely developed in electromagnetics especially for the design of new antenna. Among other examples, metamaterial concepts are aiming at reducing the coupling between two adjacent radiating elements of the array and increasing the operating bandwidth of radiating elements. It is also used for phase compensation in microwave transistors, and many more applications are rising in the recent literature. In year 2009, in analogy with electromagnetic transmission line metamaterial, our group proposed a concept of acoustic transmission line metamaterial, consisting of a waveguide periodically loaded with membranes along the duct, and transverse open channels (denoted “stubs”). Based on our proposed structure and in analogy with applications of transmission line electromagnetic metamaterials, researchers proposed the idea of an acoustic counterpart to the “backward wave antenna”. These antennas or radiating devices have a very special property such that the radiation angle or the directivity changes with the frequency. In this article, a comprehensive, step by step, design methodology for acoustic backward wave antenna is presented. For this purpose we use the model proposed in our 2009 publication for acoustic transmission line metamaterial, but we focus the discussion on the optimization of the antenna performance. We also propose some closed form formulas for the practical design of such devices, and a formal validation of the structure is proposed using Comsol Multiphysics.

2013

A simple & [and] accessible front-end satellite receiver for communications and e-learning in emerging countries

Olivier Videme Bossou

For the universities of the emergent countries, and those of Cameroon in particular, the fight to reach a durable development requires to know the needed scientific and technical information for their development, how to get it and to spread it out among partners in the country. Obviously, the complete answer to these preoccupations lies well beyond the framework of this project, but a projection, partial but highly significant, can nevertheless be obtained if one concentrates one's efforts on a specific technological field : in the present study, we shall treat of antennas for telecommunications systems. This subject is highly suitable as example and potential incubator for future achievements. The ultimate goal is to design and carry out the fabrication of a system of satellite communications adapted to the financial resources and to the development needs of the universities of the South. First of all, we will review the state of the art in satellite communication systems, both for already operating ones and also for new systems, still under development. Then we will determine which system of satellite telecommunications has a receiver and communication fees with affordable costs : our choice will be made on Worldspace satellite system, which was actually designed for developing countries. We will also review the status of planar antenna and low noise amplifier technology, and then explicit the basic challenge involved in our thesis project. One of the aims of this project is to use local wood as dielectric in SSFIP type antennas. Before using a material as dielectric in an antenna design, it must be characterized. Before carrying the characterization of local wood species, we will begin by reviewing some commonly used dielectric measurement techniques. Then we will carry out a series of measurements to characterize the species of wood growing in the Cameroonian forest. At the end of the series of measurements and according to the dielectric losses observed, we will select the species of wood best suited to make a good substrate for a microstrip antenna. Next, we will design, manufacture and test low cost antennas. These antennas must satisfy not only technical criteria compatible with those of the telecommunications system chosen but, even most importantly, it must meet socioeconomic criteria : the antennas must be manufactured with low cost and locally available materials, making use of simple technological processes. Once we have found the wood species that exhibits the lowest dielectric losses, we will simulate, and then manufacture the SSFIP type antenna with wood as substrate and aluminium as conducting element. Then we will measure its characteristics and check whether they are compatible with those of a Worldspace receiver. The signal received from the satellite by the antenna is very weak. It will be important to strengthen the received signal with a low noise amplifier (LNA) before connecting the antenna to the receiver. Thus the antenna and the LNA constitute an active antenna and form what we call here the radiofrequency (RF) front-end. We will design, manufacture and measure the LNA characteristics. A simple manufacturing process must be used to realize these antennas, because later on they must be manufactured locally in Cameroon : this is a determining challenge to ensure the economic independence, which is essential in our thesis project. Afterwards we will join the LNA to the planar antenna and connect the active antenna obtained in this manner to a commercial Worldspace receiver. Finally, we will perform receiving tests of the Worldspace radio station with the system designed. In parallel, our project includes a second goal, which presents an equivalent significance. We will use existing Matlab codes to develop an online course to teach antenna theory. In addition, at the end of the project and when the Cameroonian local manufacture would have started, we will put all algorithms used for the antenna design on the web site in a multi-media applet, together with a complete documentation of all the manufacturing technologies used. The courses that already exist in Lausanne and Yaounde, relating to the description of other types of antennas will be added, thus leading to a complete teachware that would ensure the durability and the dissemination of the results obtained, and would provide an invaluable tool for teaching and training.

EPFL2007