Predicting the state and properties of Deepwater Horizon oil under pressure using the Peng-Robinson equation of state
Related publications (40)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work examines the flow boiling of R134a in 0.54-mm square parallel minichannels with a particular focus on analyzing the transient pressure drop of individual channels in a wide range of heat andmass flux conditions. The flow rates are in the range fr ...
Aluminium uptake in calcium silicate hydrate (C-S-H) was studied at different Ca/Si ratios from 0.6 to 1.6 at 20 degrees C. Aluminium incorporation in C-S-H depends on the total amount of aluminium present in the sample. At low Al/Si ratio (
The discovery of oiled and non-oiled honeycomb material in the Gulf of Mexico surface waters and along coastal beaches shortly after the explosion of Deepwater Horizon sparked debate about its origin and the oil covering it. We show that the unknown pieces ...
Quantitative information regarding the endmember composition of the gas and oil that flowed from the Macondo well during the Deepwater Horizon oil spill is essential for determining the oil flow rate, total oil volume released, and trajectories and fates o ...
We seek to study numerically two-phase flow phenomena with phase change through the finite-element method (FEM) and the arbitrary Lagrangian-Eulerian (ALE) framework. This method is based on the so-called one-fluid formulation; thus, only one set of equati ...
Biodegradation plays a major role in the natural attenuation of oil spills. However, limited information is available about biodegradation of different saturated hydrocarbon classes in surface environments, despite that oils are composed mostly of saturate ...
With the expansion of offshore petroleum extraction, validated models are needed to simulate the behaviors of petroleum compounds released in deep (>100 m) waters. We present a thermodynamic model of the densities, viscosities, and gas-liquid-water partiti ...
Optical properties of the PbTiO3 thin films fabricated by chemical solution deposition have been measured with variable angle spectroscopic ellipsometry in the spectral range of 1-6 eV and in the temperature interval from room temperature to 950 K. The opt ...
During the first hours after release of petroleum at sea, crude oil hydrocarbons partition rapidly into air and water. However limited information is available about very early evaporation and dissolution processes. We report on the composition of the oil ...
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...