Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The influence of the thickness of a thin (1.5-30 nm) copper layer on the thermal boundary conductance (TBC) at the interface between gold and silicon, sapphire and diamond, respectively, was studied using Time Domain Thermoreflectance. Overall, a monotonic ...
Scanning probe lithography (SPL) includes a variety of techniques which produce nanopatterns based on the interaction between an AFM probe and a substrate, Figure 1 shows an overview of possible techniques of scanning probe lithography. Here we focus on th ...
Open-pore aluminium foams are of interest in thermal management of power electronics due to their large specific surface area, low weight and relatively high thermal conductivity. The replication process is a low-cost and simple foam manufacturing method t ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
Silicon carbide based composites are candidates for structural components and fuel claddings in nuclear power plants. In the frame of accident tolerant fuel research, the effective through-thickness thermal conductivity of SiC/SiC prototype claddings is in ...
Radiative-conductive heat transfer in porous media is usually investigated by decoupling the heat transfer modes and solving the volume-averaged continuum equations using effective transport properties. However, both modes are naturally coupled and couplin ...
Surface scattering is the key limiting factor to thermal transport in dielectric crystals as the length scales are reduced or when temperature is lowered. To explain this phenomenon, it is commonly assumed that the mean free paths of heat carriers are boun ...
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
Thermal conductivity in dielectric crystals is the result of the relaxation of lattice vibrations described by the phonon Boltzmann transport equation. Remarkably, an exact microscopic definition of the heat carriers and their relaxation times is still mis ...
