Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The main goal of this paper is to shed light on the effect of strain rate and viscoplastic deformation of bulk solder on the interfacial failure of lead-free solder joints. For this purpose, interfacial damage evolution and mode I fracture behavior of the ...
Magnesium is an excellent candidate as lightweight structural material, but has strong plastic anisotropy, and the activation of, operation of, and competition between different slip and twinning systems remain active areas of research. Here, the nucleatio ...
This text address the challenge of answering to two inseparable question: What is a just territory ? and What can we do to approach more just territories? The first section of this text explores three approaches of spatial justice as deployed by Jacques Lé ...
The tensile properties of the high-chromium tempered martensitic reduced activation steel Eurofer97 were determined from tests carried out over a wide range of strain-rates on cylindrical specimens. The quasi-static tests were performed with a universal el ...
The ring strain energies of carbomeric-cycloalkanes (molecules with one or more acetylene spacer units placed into carbon single bonds) are assessed using a series of isodesmic, homodesmotic, and hyperhomodesmotic chemical equations. Isodesmic bond separat ...
In this paper, the behaviour of the tantalum subjected to a complex range of thermomechanical solicitations is studied and modelled. The objective of this work is the prediction of microstructure evolution of a tantalum part that is cold flow-formed, then ...
We investigate the dynamic behavior of concrete in relation to its composition within a computational framework (FEM). Concrete is modeled using a meso-mechanical approach in which aggregates and mortar are represented explicitly. Both continuum phases are ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
Submerged concrete specimens with 0.55 and 0.65 water-cement ratio were studied under cyclic freeze-thaw conditions at two different rates of temperature change. The strain variation at the centres of each of the specimens was measured using embedded strai ...
