Innovative low-mass cooling systems for the ALICE ITS Upgrade detector at CERN
Related publications (254)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The current industrial need for compact high heat density cooling devices has conveyed an increasing interest on convective boiling in micro-channels. Although there is general agreement that these systems may be able to dissipate potentially very high hea ...
Megawatt pilot target experiment (MEGAPIE) is an international project aimed at demonstrating the feasibility of a liquid lead–bismuth target for spallation facilities at a maximum beam power level of 1 MW. The thermal-hydraulics data measured during the M ...
Nowadays medium voltage conversion systems, like traction and energy distribution systems, aim to increase power density. Volume, weight and material reduction are gaining the market today. Due to the development of new high power semi-conductor devices a ...
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
The paper presents an application of the transient heater foil measurement technique using thermochromic liquid crystals (TLC) to endwall heat transfer and film cooling investigations in a transonic turbine vane cascade. The film cooling configuration cons ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2008
A phenomenological modelling approach has been developed to describe the massive transformation and the formation of lamellar microstructures during cooling in binary gamma titanium aluminides. The modelling approach is based on a combination of nucleation ...
Summary Knowing the rate of evaporation from surface water resources such as chan¬nels and reservoirs is essential for precise management of the water balance. However, evaporation is difficult to measure experimentally over water surfaces and several tech¬ ...
A computer model for the MEGAwatt Pilot Target Experiment (MEGAPIE) was developed, verified and applied to the analysis of the reference accident, resulting from the hypothetical loss of a Pb–Bi inventory and subsequent cooling down of the target with free ...
The purpose of this literature review is to compare different cooling technologies currently in development in research laboratories that are competing to solve the challenge of cooling the next generation of high heat flux computer chips. Today, most deve ...
Experimental pressure drop results on boiling water flow through three helical coils of tube inner diameter of 4.03 mm and 4.98 mm and coil diameter to tube diameter ratio of 26.1, 64.1 and 93.3 are presented. Both subcooled and saturated flow boiling are ...