Publication

Internal electrical and strain fields influence on the electrical tunability of epitaxial Ba0.7Sr0.3TiO3 thin films

Nava Setter, Sarunas Bagdzevicius, Silviu Cosmin Sandu, Barbara Maraston Fraygola
2016
Journal paper

Abstract

Perpetual demand for higher transfer speed and ever increasing miniaturization of radio and microwave telecommunication devices demands new materials with high electrical tunability. We have investigated built in electrical and strain fields' influence on the electrical tunability in Ba0.7Sr0.3TiO3 thin film hetero- system grown by pulsed laser deposition technique. We observed the built in electrical field by local piezo-force microscopy (as deflected hysteresis loops) and macroscopic impedance analysis (as asymmetric tunability curves), with the calculated 88 kV/cm built in field at room temperature. Negative-1.4% misfit strain (due to clamping by the substrate) enhanced ferroelectric phase transition temperature in Ba0.7Sr0.3TiO3 thin film by more than 300 K. Built in fields do not deteriorate functional film properties- dielectric permittivity and tunability are comparable to the best to date values observed in Ba1-xSrxTiO3 thin films. (C) 2016 AIP Publishing LLC.

Official source

https://infoscience.epfl.ch/record/219381?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (35)

Dielectric

In electromagnetism, a dielectric (or dielectric medium) is an electrical insulator that can be polarised by an applied electric field. When a dielectric material is placed in an electric field, electric charges do not flow through the material as they do in an electrical conductor, because they have no loosely bound, or free, electrons that may drift through the material, but instead they shift, only slightly, from their average equilibrium positions, causing dielectric polarisation.

Creep (deformation)

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to undergo slow deformation while subject to persistent mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material. Creep is more severe in materials that are subjected to heat for long periods and generally increase as they near their melting point. The rate of deformation is a function of the material's properties, exposure time, exposure temperature and the applied structural load.

Finite strain theory

In continuum mechanics, the finite strain theory—also called large strain theory, or large deformation theory—deals with deformations in which strains and/or rotations are large enough to invalidate assumptions inherent in infinitesimal strain theory. In this case, the undeformed and deformed configurations of the continuum are significantly different, requiring a clear distinction between them. This is commonly the case with elastomers, plastically-deforming materials and other fluids and biological soft tissue.

Related publications (35)

Pyroresistive response of percolating conductive polymer composites

Claudio Grimaldi

The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical parameters such as temper ...

Amer Physical Soc2024

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Jonas De Jesus Diaz Gomez

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

EPFL2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Related MOOCs (10)

Micro and Nanofabrication (MEMS)

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Microstructure Fabrication Technologies I

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Micro and Nanofabrication (MEMS)

Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.