Heat transfer to liquid metal: Review of data and correlations for tube bundles
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
Xu et al. have recently published a set of results for boiling heat transfer measurements in a multi- channel micro- scale evaporator for flow boiling of acetone in triangular cross- section channels ( hydraulic diameter of 155.4 mm). In the present collab ...
This thesis deals with the combined utilisation of a reaction calorimeter, the RC1® commercialised by Mettler Toledo and equipped with a 2 L glass reactor, and the heat transfer dynamics modelling of industrial reactors. By doing so, the temperature evolut ...
The aim of this work is to develop a microstructured reactor based on filamentous catalysts for the Oxidative Steam-Reforming of Methanol (OSRM), to produce hydrogen as feed for a fuel cell, in an autothermal way. Hydrogen is produced by the methanol Steam ...
The paper presents a comparison of transient calculations for two 80-MWt MOX-fuelled experimental accelerator-driven systems (XADS), one cooled by lead-bismuth eutectic and the other by helium. The results for protected (with accelerator beam trip) and unp ...
During the early stages of research and development chemical industry needs flexible and versatile tools to investigate chemical reaction systems. An important part of the optimisation of a process considering economic factors, risk analysis and environmen ...
The tubes in shell-and-tube condensers, widely used in refrigeration and chemical process industries, are subjected to condensate inundation from the neighboring tubes. The aim of the present investigation is to study the effect of condensate inundation on ...
The PhD thesis deals with the optimization of the reaction calorimetry technique to monitor chemical reactions in supercritical fluids. The aim is to develop this thermal analysis technique to monitor the heat released by a chemical reaction in a high pres ...
A high pressure reactor calorimeter was developed to study chem. reactions in supercrit. fluids. Non-dimensional anal. of the heat transfer mechanism in the calorimeter verifies the application of the Nusselt correlation in scCO2. The reactor's cover and f ...
Experimental studies were performed to investigate the flow patterns of liquid films of R-134a on vertical arrays of horizontal tubes under adiabatic test conditions at room temperature and during condensation at a saturation temperature of 304 K. Three ar ...