Mechanical and microstructural characteristics of Ti6Al4V/AA2519 and Ti6Al4V/AA1050/AA2519 laminates manufactured by explosive welding
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This PhD Thesis work was aimed at investigating the potentiality of tungsten-base materials as structural materials for the future thermonuclear fusion reactors in attempting to develop reduced activation tungsten-base materials with high strength and suff ...
In this work, the tribocorrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr and Ti-29Nb-13Ta-4.6Zr beta titanium alloys which are candidate biomaterials for joint prostheses is studied against ultra high molecular weight polyethylene in Hank's balanced salt solut ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
An argon gas atomized, pre-alloyed Fe-14Cr-2W-0.3Ti (wt.%) reduced activation ferritic (RAF) steel powder was mechanically alloyed with 0.3wt.% Y2O3 nano-particles in an attritor ball mill and consolidated by hot isostatic pressing at 1150 °C under a press ...
Cu-Ni-Sn alloys with Pb additions exhibit high mechanical strength at room temperature coupled with good machinability but experience a significant ductility loss above the melting point of lead. We explore here the influence of minor additions of Al, Mn, ...
The main goal of this work was to manufacture an oxide dispersion strengthened (ODS) reduced activation ferritic steel from a pre-alloyed, gas atomised Fe-14Cr-2W-0.2Ti (in wt.%) powder mechanically alloyed with either 0.3%Y2O(3) or 0.5%Fe2Y particles and ...
Ingots of an oxide dispersion strengthened reduced activation ferritic steel with the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) chemical composition (in wt.%) were synthesized by mechanical alloying of elemental powders with 0.3 wt.% Y2O3 particles in a planetary ball ...
The main goal of this work was to manufacture an oxide dispersion strengthened (ODS) reduced activation ferritic steel from a pre-alloyed, gas atomised Fe-14Cr-2W-0.2Ti (in wt.%) powder mechanically alloyed with either 0.3%Y2O(3) or 0.5%Fe2Y particles and ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
The paper presents the microstructure and mechanical properties of an oxide dispersion strengthened (ODS), reduced activation, ferritic steel, namely the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) alloy, which was fabricated by hot isostatic pressing followed by high sp ...
