Grain boundary complexion and transparent polycrystalline alumina from an atomistic simulation perspective
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
Copper and copper alloys typically experience a sharp loss in ductility at intermediate temperature, induced by grain boundary damage and fracture processes. The susceptibility of the material to intermediate temperature embrittlement is, as a result, stro ...
The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two st ...
According to various studies, Grain Boundary Engineering (GBE) is likely to enhance mechanical properties of polycrystalline materials. The present investigation highlights some relationships between thermomechanical process (TMP) parameters of a commercia ...
Transparent polycrystalline alumina (PCA) is a promising replacement for sapphire. Its optical properties however are highly dependent on the grain size and residual porosity which need to be controlled for real inline transmittances (RIT), that are high e ...
Microstructural control is a key aspect in producing ceramics with tailored properties and is often achieved by using dopants in a rather empirical fashion. Atomic scale simulations could provide much needed insight but the long-standing challenge of linki ...
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
A method is presented for the simultaneous measurement of relative grain boundary energy and all five macroscopic grain boundary degrees of freedom in leaded copper. When compared to the Wynblatt–Takashima model, results suggest a lowered boundary energy w ...
Two-step sintering of nanocrystalline zirconia powder stabilized with 8 mol% yttria resulted in remarkable enhancement of the electrical conductivity and significant suppression of the accelerated grain growth. The electrical conductivity of the nearly ful ...
Metal matrix composites (MMCs) comprising nano/microcrystalline matrices and reinforcements exhibit impressive mechanical behaviors derived by exploiting the size effects due to development of geometrically necessary dislocations. In such nanostructured MM ...
