Publication

Two-Phase Mini-Thermosyphon Electronics Cooling, Part 4: Application to 2U Servers

Related publications (58)

Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation

Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...

EPFL2022

Conductive Heat Transfer in Partially Saturated Gas Diffusion Layers with Evaporative Cooling

Sophia Haussener, Felix N. Büchi, Mirco Magnini

Heat transport is an important, though often neglected function of gas diffusion layers (GDLs) of polymer electrolyte membrane fuel cells. Thermal conductivity is a key property, especially in partially water saturated GDLs and when the phase change of wat ...

2022

Microchannel cooling for the LHCb VELO Upgrade I

Alessandro Mapelli, Giulia Romagnoli, Victor Coco

The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase CO2 for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale applic ...

ELSEVIER2022

First steps towards interlocking modular microfluidic cooling substrates (i-MμCS) for future silicon tracking detectors in High Energy Physics (HEP)

Philippe Renaud, Massimo Angeletti

In future High Energy Physics detectors, the coverage of large surfaces with silicon pixel chip sensors poses a challenge for the sensors positioning, for their cooling, assembly, and interconnection. The use of a cooling substrate on which the sensors are ...

2022

Thermal management of components for high energy physics experiments and space applications

Timothée Robert Sophus Frei

High-energy physics (HEP) experiments and space missions share a common challenge: thermal management in harsh environments. The severe constraints in both fields make cooling of electronic components a major design concern. This thesis aims to develop hig ...

EPFL2021

Operational Map And Thermal Performance Of A Thermosyphon Cooling System For Compact Servers

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

This paper advances the state-of-the-art in novel passive two-phase systems for more efficient cooling of datacenters and telecom central offices compared to the traditional air-based cooling solutions (e.g. aisle-based containment systems). The proposed p ...

AMER SOC MECHANICAL ENGINEERS2021

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to d ...

AMER SOC MECHANICAL ENGINEERS2021

Hybrid Two-Phase Cooling Technology For Next-Generation Servers: Thermal Performance Analysis

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

This paper advances the work presented at ITHERM 2020 where a novel passive two-phase technology was introduced for more efficient cooling of datacenters compared to air-based cooling solutions (e.g. In-Room, In-Row, etc.). The proposed hybrid two-phase co ...

IEEE2021

Novel pulsating heat pipe for high density power data centres: performance and flow regime analysis

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

With the advancement of technologies such as Artificial Intelligence and 5G telecommunications, where computational rate is constantly pushing its limits, highly efficient and reliable cooling devices are starting to become an overly critical factor. Not o ...

IEEE2021

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...

EPFL2021

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.