Infrared measurements of the heat flux spreading under variable divertor geometries in TCV
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The precipitation hardened CuCrZr alloy is used in fusion machines for the heat sink of intensely cooled plasma facing components (PFC) due to its good thermal and mechanical properties. Albeit, the feedback from its application in Tore Supra (French tokam ...
Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...
Numerical simulation of the tokamak scrape-off layer (SOL) is an essential tool for the prediction of the conditions to be expected in future fusion reactors such as the ITER project, now under construction in Southern France. One particularly important is ...
In magnetically confined fusion devices, the energy and particle transport is significantly larger than expected from purely collisional processes. This degraded confinement mostly results from small-scale turbulence and prevents from reaching self-sustain ...
The change of length upon heat treatment of steel jacketed, Nb3Sn cable-in-conduit conductors (CICC) is driven by the difference of coefficient of thermal expansion between Nb3Sn and the other components. The cold work of the steel jacket also plays an imp ...
Recent simulations of JET and ASDEX Upgrade plasmas with EDGE2D and SOLPS, respectively, showed that upstream radial electric field in the scrape-off layer (SOL) is substantially below values expected from simple estimates, based on the effects of the pote ...
Heat loads on the JET MarkIIHD divertor are measured by IR thermography in high triangularity plasmas with edge conditions of advanced tokamak scenarios (AT). AT scenarios operate at low density (n(e,av) < 5 x 10(19) m(-3) at JET) to maximise the non induc ...
The thermal performance of Fe-(12-14)Cr-2W-0.3Ti-0.3Y(2)O(3) ODS reduced activation ferritic steels, which are considered as candidate first wall materials for the future fusion power reactors and were manufactured by mechanical alloying in hydrogen and ho ...
All the recent DEMO design studies for helium cooled divertors utilize tungsten materials and alloys, mainly due to their high temperature strength, good thermal conductivity, low erosion, and comparably low activation under neutron irradiation. The long-t ...
This paper is focused on the design, simulation and optimisation of the ITER divertor magnetic tangential coils. The most critical issue for the divertor coils is to minimise RITES [G. Vayakis, et al., Radiation-induced thermoelectric sensitivity (RITES) i ...
