Microstructure and ferroelectricity of BaTiO3 thin films on Si for integrated photonics

Patrik Hoffmann, Chiara Marchiori, Michael Oliver Reinke
Institute of Physics, 2017
Journal paper

Abstract

Significant progress has been made in integrating novel materials into silicon photonic structures in order to extend the functionality of photonic circuits. One of these promising optical materials is BaTiO3 or barium titanate (BTO) that exhibits a very large Pockels coefficient as required for high-speed light modulators. However, all previous demonstrations show a noticable reduction of the Pockels effect in BTO thin films deposited on silicon substrates compared to BTO bulk crystals. Here, we report on the strong dependence of the Pockels effect in BTO thin films on their microstructure, and provide guidelines on how to engineer thin films with strong electro-optic response. We employ several deposition methods such as molecular beam epitaxy and chemical vapor deposition to realize BTO thin films with different morphology and crystalline structure. While a linear electro-optic response is present even in porous, polycrystalline BTO thin films with an effective Pockels coefficient r(eff). = 6 pmV(-1), it is maximized for dense, tetragonal, epitaxial BTO films (r(eff) = 140 pm V-1). By identifying the key structural predictors of electro-optic response in BTO/Si, we provide a roadmap to fully exploit the linear electro-optic effect in novel hybrid oxide/semiconductor nanophotonic devices.

Official source

https://infoscience.epfl.ch/record/226891?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

The rational synthesis of novel materials requires the control over the arrangement of matter in order to meet the desired properties for applications and devices. Ultimately, control means to define the place of each atom and determine its chemical state, as well as being able to confirm the result in a measurement. Control at the atomic level can be achieved with scanning tunneling microscopy (STM), both in imaging and atomic manipulation. The latter, however, can never be used in meso- or even macroscopic material synthesis. Self-ordering phenomena determines atomic control in material synthesis as well, observed for instance in protein folding or in molecular beam epitaxy (MBE) technology. In both cases the atomically determined arrangement of the atoms in the structure is controlled only by environmental parameters that steer the self-ordering phenomena. In this thesis I show that electrospray ion beam deposition (ES-IBD) or ion soft-landing is a material processing technique, which combines and even extends the level of control offered by MBE. It is demonstrated that a vast range of complex organic materials including peptides and proteins is now available to ultrapure vacuum processing and moreover completely novel schemes of controlling self-ordering processes are provided. In-situ STM is applied to investigate the structure formation of complex molecules deposited by ES-IBD on well-defined, clean, and atomically flat surfaces in ultrahigh vacuum at the greatest detail. This allows us to explore the novel control features that are intrinsic to the ES-IBD deposition process like online coverage monitoring, deposition energy control, and mass-selection to select charge states or reactive species. The molecules studied here include organic molecular salts, dye molecules, reactive polymer building blocks, and finally peptides and proteins. Crystalline layer-by-layer as well as island growth was observed and revealed the equivalence to conventional MBE growth. On the basis of these deposition experiments the crucial influence of clusters in the ion beam for high material flux was discovered. Furthermore, it was found that the chemical state of the molecule is a key factor for the deposition result as chemical reactions can be induced or the self-assembly behavior can be altered. Alongside the capability to handle also extremely reactive molecules, the feasibility to control chemical reactions occurring as a result of an external stimulus to a specifically selected reactive species is demonstrated. Employing the control parameters that are specific to ES-IBD like charge state selection and deposition energy to complex biomolecules opens up new perspectives for vacuum deposition. In addition to the self-assembly governed by the molecule-substrate and molecule-molecule interaction, it was possible to actively steer the structure formation of proteins by influencing their stiffness and their reactivity through their charge state as well as by the deposition energy, parameters intrinsic to the ES-IBD method. Hence, electrospray ion beam deposition is indeed a tool to prepare well defined surface coatings at highest level of control and complexity. To be relevant for industrial applications, the performance of the system has to be further improved, most importantly in terms of deposition rate. In general, ES-IBD enables new approaches for the growth of functional coatings but also serving as perfect sample preparation tool for the characterization of complex molecules on the atomic scale by scanning probe or more general surface science methods.

EPFL2013

Air cooling powered by façade integrated coloured opaque solar thermal panels

Stefan Mertin, Andreas Schueler

For building integration of solar-powered energy systems, aesthetic aspects play an importantrole. Covering a standard solar collector with a coloured glazing, opaque to the human eye but highly transparent to solar energy, permits a perfect architectural integration of solar thermal panels into glazed building façades. The thermal energy produced can be used for both solar heating and cooling, as well as for domestic hot water. The principle of the coloured appearance is based on interference in the thin-film coating on the reverse side of the cover glass. Different interference filters based on nano-composite materials deposited by the solgel method were presented at CISBAT 2007 [1]. Currently, we are developing new plasma-deposition processes, which are more suitable for industrial large-scale production. A new state-of-the-art ultra-high vacuum (UHV) system for magnetron sputtering deposition of novel nano-composite solar coatings has recently been designed, constructed, and installed at the Solar Energy and Building Physics Laboratory (LESO-PB). Up to five different magnetron sources can be used simultaneously, in reactive and non-reactive mode. The geometric configuration of the chamber has been optimised for best film homogeneity and allows the deposition on substrates up to 100 mm in diameter. The optical and electronic properties of thin films are closely interrelated and highly relevant for solar coatings. Photoelectron spectroscopy provides information on the coating structure, the deposited material and its chemical state inside the coating, as well as the nature of the interface between different layers. A system for ESCA analysis (Electron Spectroscopy for Chemical Analysis) has recently been installed and put into operation at LESO-PB. By ellipsometry and spectrophotometry, we can determine exactly the different optical properties of the coating, such as layer thickness, refractive index, or absorption coefficient. This provides best conditions for highly efficient research and development on new materials for further optimisation of the coloured interference filters.First results have been obtained with our new experimental infrastructure and will be presented in this contribution.

EPFL2011

Coloured coatings for glazing of active solar thermal façades by reactive magnetron sputtering

Martin Joly, Stefan Mertin, Jean-Louis Scartezzini, Andreas Schueler

For building integration of solar-powered energy systems, aesthetic aspects play an important role. Covering a standard solar collector with a coloured glazing, opaque to the human eye but highly transparent to solar energy, permits a perfect architectural integration of solar thermal panels into glazed building façades. The thermal energy produced can be used for both solar heating and cooling, as well as for domestic hot water. The principle of the coloured appearance is based on interference in the thin-film coating on the reverse side of the cover glass. Different interference filters based on nano-composite materials deposited by the solgel method were presented at CISBAT 2007 [1]. Currently, we are developing new plasma-deposition processes, which are more suitable for industrial large-scale production. A new state-of-the-art ultra-high vacuum (UHV) system for magnetron sputtering deposition of novel nano-composite solar coatings has recently been designed, constructed, and installed at the Solar Energy and Building Physics Laboratory (LESO-PB). Up to five different magnetron sources can be used simultaneously, in reactive and non-reactive mode. The geometric configuration of the chamber has been optimised for best film homogeneity and allows the deposition on substrates up to 100 mm in diameter. The optical and electronic properties of thin films are closely interrelated and highly relevant for solar coatings. Photoelectron spectroscopy provides information on the coating structure, the deposited material and its chemical state inside the coating, as well as the nature of the interface between different layers. A system for ESCA analysis (Electron Spectroscopy for Chemical Analysis) has recently been installed and put into operation at LESO-PB. By ellipsometry and spectrophotometry, we can determine exactly the different optical properties of the coating, such as layer thickness, refractive index, or absorption coefficient. This provides best conditions for highly efficient research and development on new materials for further optimisation of the coloured interference filters. First results have been obtained with our new experimental infrastructure and will be presented in this contribution.

EPFL2011

Air cooling powered by façade integrated coloured opaque solar thermal panels

Stefan Mertin, Andreas Schueler

EPFL2011

EPFL2013

Coloured coatings for glazing of active solar thermal façades by reactive magnetron sputtering

Martin Joly, Stefan Mertin, Jean-Louis Scartezzini, Andreas Schueler

For building integration of solar-powered energy systems, aesthetic aspects play an important role. Covering a standard solar collector with a coloured glazing, opaque to the human eye but highly transparent to solar energy, permits a perfect architectural integration of solar thermal panels into glazed building façades. The thermal energy produced can be used for both solar heating and cooling, as well as for domestic hot water. The principle of the coloured appearance is based on interference in the thin-film coating on the reverse side of the cover glass. Different interference filters based on nano-composite materials deposited by the solgel method were presented at CISBAT 2007 [1]. Currently, we are developing new plasma-deposition processes, which are more suitable for industrial large-scale production. A new state-of-the-art ultra-high vacuum (UHV) system for magnetron sputtering deposition of novel nano-composite solar coatings has recently been designed, constructed, and installed at the Solar Energy and Building Physics Laboratory (LESO-PB). Up to five different magnetron sources can be used simultaneously, in reactive and non-reactive mode. The geometric configuration of the chamber has been optimised for best film homogeneity and allows the deposition on substrates up to 100 mm in diameter. The optical and electronic properties of thin films are closely interrelated and highly relevant for solar coatings. Photoelectron spectroscopy provides information on the coating structure, the deposited material and its chemical state inside the coating, as well as the nature of the interface between different layers. A system for ESCA analysis (Electron Spectroscopy for Chemical Analysis) has recently been installed and put into operation at LESO-PB. By ellipsometry and spectrophotometry, we can determine exactly the different optical properties of the coating, such as layer thickness, refractive index, or absorption coefficient. This provides best conditions for highly efficient research and development on new materials for further optimisation of the coloured interference filters. First results have been obtained with our new experimental infrastructure and will be presented in this contribution.

EPFL2011