Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In its most basic form an oscillator consists of a resonator driven on resonance, through feedback, to create a periodic signal sustained by a static energy source. The generation of a stable frequency, the basic function of oscillators, is typically achie ...
Many applications based on resonant nanoelectromechanical systems (NEMS) require monitoring their natural frequency of oscillation over time with high precision, e.g. for gas sensing or nanomechanical mass spectrometry. In this study, we integrate a very-h ...
Phase-noise mechanisms in cross-coupled LC voltage-controlled oscillators (VCOs) are reviewed based on a physical understanding of reactive power imbalances in the tank and in the active part. These phenomena are proven to be the predominant phase-noise de ...
We present a fully integrated detector suitable for active tracking of interventional devices in MR-guided interventions. The single-chip microsystem consists of a detection coil, a tuning capacitor, an intermediate frequency downconversion receiver, and a ...
This work presents a Bulk Acoustic Wave (BAW) resonator based 2.4-GHz front-end compliant to the Bluetooth LE standard and targeting advanced biomedical applications. A new transceiver architecture is proposed that combines BAW resonators and a sub-samplin ...
In this paper, a 4.6 GHz frequency synthesizer integrated circuit for Cesium-based miniature atomic clocks is presented. Based on a fractional-N phase-locked loop (PLL) with sigma-delta modulator, the chip features a frequency resolution below 10E-3 Hz at ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2011
A VCO topology with a high gm at RF and low gm at low frequencies (LF) is presented. A high gm(RF) improves start-up conditions, and a low gm(LF) enables a significant improvement of the phase noise and the power supply rejection. The VCO with a modified p ...
A novel frequency synthesizer with a strong emphasis on low-power consumption (2mW) was developed for this thesis. A BAW-resonator was used for the design of the high-frequency oscillator. The BAW's high Q-Factor ensured a minimal power consumption, while ...
If an analog-to-digital converter (ADC) is used within a ΣΔ converter such that the loop filter is mixed signal, then the ADC does not need to have the full resolution of the ΣΔ converter, and its input values will not be uniformly distributed over the inp ...
It has already been a few years since the first appearance of micro-electromechanical systems (MEMS) in academic research. Since then, a broad number of devices have been designed under this generic term. Bulk-acoustic wave (BAW) resonators are among the f ...