Effect of End-Restraint Conditions on Energy Pile Behavior
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Energy piles, due to their dual roles, are exposed to temperature change throughout their life time, which may cause axial displacements, additional axial stresses and changes in the shaft resistance along their lengths. The extent of these effects highly ...
Current geomechanical applications imply non-isothermal processes of unsaturated geomaterials, in most cases following stress paths different than the classical triaxial compression often used in laboratory testing. Though the effects of temperature, sucti ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stres ...
The ITER Central Solenoid (CS), positioned in the center of the ITER tokamak, will provide a magnetic field, contributing to the confinement of the plasma. The 13 m high CS consists of a vertical stack of 6 independently driven modules, dynamically activat ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
This study investigates the impact that different magnitudes and combinations of thermal and axial mechanical loads have on the mechanical behaviour of energy piles in saturated sand. The work is based on the results of a series of thermo-hydro-mechanical ...
Energy piles, due to their unique roles of coupling the structural support and heat exchange with the surrounding ground, are subject to temperature cycles during their lifetime. Although their behaviour during individual temperature increase or decrease h ...
To date, no field data referring to various operating energy piles over time-scales of practical applications had been made available to investigate the thermally induced “group action”. This paper presents the results of a full-scale field test and a thre ...
