Publication

An anomalous metal-rich phosphogypsum: Characterization and classification according to international regulations

2017
Journal paper
Abstract

Phosphogypsum is the main waste generated by the phosphate fertilizer industry. Despite the high level of pollutants found in phosphogypsum and the proximity of stacks to cities, there are no specific regulations for the management of this waste. This study addresses this issue by applying to phosphogypsum, from a fertilizer plant in Huelva (SW Spain), the leaching tests proposed by the current European and US environmental regulations for wastes management and classification. Two main conclusions were obtained: 1) the anomalous metal and metalloid concentrations (e.g. As, Fe, Pb, Sb, Mn, V and Cu) and higher mobility observed in the Huelva phosphogypsum compared to other stacks worldwide, and 2) the discrepancies observed between EU and US regulations dealing with hazardousness classification of these materials. This latter finding suggests the need to use complementary assessment protocols to obtain a better characterization and classification of these wastes. An evaluation of the potential risk to the aquatic life according to the US EPA regulation is proposed in this study. The results warn about the acute and chronic effects on the aquatic life of this waste and suggest the adoption of more strict measures for a safe disposal of phosphogypsum stacks. (C) 2017 Elsevier B.V. All rights reserved.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (34)
Waste management
Waste management or waste disposal includes the processes and actions required to manage waste from its inception to its final disposal. This includes the collection, transport, treatment, and disposal of waste, together with monitoring and regulation of the waste management process and waste-related laws, technologies, and economic mechanisms. Waste can be solid, liquid, or gases and each type has different methods of disposal and management.
High-level waste
High-level waste (HLW) is a type of nuclear waste created by the reprocessing of spent nuclear fuel. It exists in two main forms: First and second cycle raffinate and other waste streams created by nuclear reprocessing. Waste formed by vitrification of liquid high-level waste. Liquid high-level waste is typically held temporarily in underground tanks pending vitrification. Most of the high-level waste created by the Manhattan Project and the weapons programs of the cold war exists in this form because funding for further processing was typically not part of the original weapons programs.
Fertilizer
A fertilizer (American English) or fertiliser (British English) is any material of natural or synthetic origin that is applied to soil or to plant tissues to supply plant nutrients. Fertilizers may be distinct from liming materials or other non-nutrient soil amendments. Many sources of fertilizer exist, both natural and industrially produced. For most modern agricultural practices, fertilization focuses on three main macro nutrients: nitrogen (N), phosphorus (P), and potassium (K) with occasional addition of supplements like rock flour for micronutrients.
Show more
Related publications (32)

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Paul Joseph Dyson, Mingyang Liu, Xinbang Wu

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a su ...
Berlin2024

Questioning obsolescence: When does a dwelling reach the end of its life?

Ankita Singhvi

Buildings are demolished when they are considered obsolete, in other words, when they have reached the end of their lifespan. Demolition leads to waste; in Europe, construction and demolition waste accounts for approximately 25-30% of the total waste gener ...
2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...
EPFL2023
Show more
Related MOOCs (2)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
A Resilient Future: Science and Technology for Disaster Risk Reduction
Learn how science and technology are helping reduce our risk of disasters.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.