Process for the manufacture of polymer and composite products
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
The single-fiber composite (SFC) has been widely used to quantify fiber strength and fiber-matrix interfacial properties of fiber-reinforced composites. Here, a numerical model with an embedded-process-zone model to permit both interface debonding and matr ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of carbon fibre composites was investigated using embedded optical fibre Bragg gratings. Unidirectional and cross-ply laminates were cured on four flat moulds: a ...
A Green's function method (GFM) for simulating fiber damage evolution and tensile strength in fiber-reinforced composites is compared in detail to the predictions of the standard shear-lag model (SLM) widely used in the literature. The GFM extracts the in- ...
The influence of the mould material on the build-up of internal stresses during autoclave cure of a unidirectional carbon fibre composite material was investigated using embedded optical fibre Bragg gratings. Four flat moulds (i.e. aluminium, steel, carbon ...
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
A moulding process, in particular a bladder inflation moulding process for the production of a composite material based part, said composite material comprising a polymer matrix and reinforcing fibres, wherein at least a portion of external surface of said ...
