Publication

Generation of high-brightness spectrally flat supercontinuum in 1900-2450 nm range inside a small core thulium-doped fiber amplifier

Related publications (33)

Speciation of Lanthanide Metal Ion Dopants in Microcrystalline All-Inorganic Halide Perovskite CsPbCl3

David Lyndon Emsley, Dominik Józef Kubicki, Daniel Prochowicz, Amita Ummadisingu, Albert Hofstetter

Lanthanides are versatile modulators of optoelectronic properties owing to their narrow optical emission spectra across the visible and near-infrared range. Their use in metal halide perovskites (MHPs) has recently gained prominence, although their fate in ...

Amer Chemical Soc2024

Observation of SQUID-Like Behavior in Fiber Laser with Intra-Cavity Epsilon-Near-Zero Effect

Camille Sophie Brès, Marco Clementi, Jiaye Wu, Qian Li, Xuanyi Liu

Establishing relations between fundamental effects in far-flung areas of physics is a subject of great interest in the current research. Realization of a novel photonic system akin to the radio-frequency superconducting quantum interference device (RF-SQUI ...

WILEY-V C H VERLAG GMBH2022

Tailored on-chip mid-IR light generation and application for gas spectroscopy

Camille Sophie Brès, Davide Grassani, Eirini Tagkoudi

In this contribution, we present how coherent supercontinuum generation in Si3N4 waveguides enabled by fiber laser pumping can be tailored to cover part of the mid-IR spectrum and the use of such sources in spectroscopy. ...

2021

Development of coherent mid-infrared source using chalcogenide photonic crystal fibers

Sida Xing

Many molecule bonds have vibration frequencies in the mid-infrared band. Thus, this band is of great interest to molecular spectroscopy, material processing and medical applications. However, many optical materials typically used for laser sources experien ...

EPFL2019

Mask-aligner Talbot lithography using a 193 nm CW light source

Toralf Scharf, Wilfried Noell, Raoul Kirner, Andreas Vetter

We present and discuss Talbot mask-aligner lithography, relying on a continuous wave laser emitting at 193nm for the illumination. In this source, a diode laser at 772nm is amplified by a tapered amplifier in master-oscillator power-amplifier configuration ...

2018

In this paper, we review the current state and discuss new developments in opto-optical modulation (OOM) of semiconductor elements for frequency comb self-referenced stabilization of ultrafast lasers. This method has been successfully used for carrier-enve ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2018

We present first dual-wavelength all-fiber laser, based on isolator-free theta cavity with two fiber Bragg mirrors and thulium- and holmium-doped fibers. Laser provides 350mW total power with 8% slope efficiency, and linewidth less than 01.mm. ...

Ieee2017

All-fibered chalcogenide based continuous-wave parametric amplification in the mid-infrared

Camille Sophie Brès, Davide Grassani, Svyatoslav Kharitonov, Sida Xing

We demonstrate parametric amplification around 2 μm in a dispersion engineered tapered microstructured chalcogenide fiber. Almost 5 dB of signal amplification was achieved by 125 mW coupled power from a thulium-doped fiber pump laser. ...

OSA Publishing2017

Unidirectional isolator-free 2 micron fiber lasers

Svyatoslav Kharitonov

This thesis presents results of a research on unidirectional isolator-free cavity lasers, exploiting thulium-doped fiber (TDF) as amplification medium and operating in \unit[2]{\mu m} wavelength range. For fibre ring resonator, an optical isolator should b ...

EPFL2017

, ,

We report on a semiconductor disk laser emitting 1.5 W of output power at the wavelength of 745 nm via intracavity frequency doubling. The high power level and the >40 nm tuning range make the laser a promising tool for medical treatments that rely on phot ...

Spie-Int Soc Optical Engineering2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.