Microstructure Engineering in Multi-material Fibers
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hill et al. reported for the first time in 1978 the formation of refractive-index gratings in germanium doped silica fibers exposed to UV laser radiation. Since then many studies have been performed on fiber gratings and a widespread range of applications ...
A hypothesis for fiberfiber interaction in planar randomly oriented concentrated fiber suspensions is proposed and tested. The idea is that at sufficiently high fiber concentrations, friction and lubrication at fiberfiber contact points are the dominant ...
Structured filamentous zeolitic materials were prepd. by depositing ZSM-5 coatings on glass fiber supports. A homogeneous coverage of the support filaments was obtained by prepg. MFI crystals in F-contg. media at neutral pH. The samples were characterized ...
We demonstrate the possibility of broadening the emissions spectra of superfluorescent fiber lasers by combinations of different kinds of single-mode doped silica fibers. We obtained an optical bandwidth of more than 70 nm (FWHM) between 1030 and 1100 nm u ...
A complete set-up for local annealing of Shape Memory Alloys (SMA) is proposed. Such alloys, when plastically deformed at a given low temperature, have the ability to recover a previously memorised shape simply by heating up to a higher temperature. They f ...
In view of the laboratory tests performed at PSI with a Nafion tubular membrane reactor module for the catalysed methanol synthesis with CO2 and H-2 at 200 degrees C, the mechanical stability of a commercially available Nafion hollow fiber was tested at el ...
A fiber-based flexural actuator was developed using a patterned piezoelectric ZnO/electrode fiber coating on a standard telecommunications optical fiber. The actuator was composed of a concentric inner Cr/Au electrode, a thick sputtered ZnO coating, and an ...
A hypothesis for fiberfiber interaction in planar randomly oriented concentrated fiber suspensions is proposed and tested. The idea is that at sufficiently high fiber concentrations, friction and lubrication at fiberfiber contact points are the dominant ...
The characterization of the fracture process zone inside a cracked concrete specimen is investigated through optical fiber technology. Fiber Bragg gratings are used to measure the strains in the close vicinity of the crack front, thus enabling us (for the ...
We investigated the effect of the phase noise of fiber amplifiers on the linewidth of the amplified signal. We used three different sources as input signal, with linewidth between 5 kHZ and 18 GHz. We did not observe any spectral broadening of the signal l ...
