Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...
This work reports on the microstructure and mechanical properties of porous silver films produced with different sintering parameters. The microstructure is investigated by high-resolution ptychographic Xray computed tomography and scanning electron micros ...
The erosion mechanisms during abrasive waterjet (AWJ) machining have been examined for a variety of materials. However, no systematic study has considered the effect of the microstructure property relationship on the erosion mechanisms in metals. In this w ...
The compressive kinking behavior of non-slender unidirectional glass fiber-reinforced polymer (GFRP) specimens has been analyzed by finite element (FE) models. The experimentally observed imperfections, including the initial fiber waviness throughout the e ...
The mechanical properties of Fe-Mn-Al-C steel are significantly enhanced after κ-carbide precipitation via aging; however, most aging treatments are energy demanding because they require relatively high temperatures and extended holding times. This researc ...
Atomistic simulations of bicrystal samples containing a grain boundary are used to examine the effect of hydrogen atoms on the nucleation of intergranular cracks in Ni. Specifically, the theoretical strength is obtained by rigid separation of the two cryst ...
Polycrystalline chemical vapour deposited ZnO films are commonly used as transparent electrodes for photovoltaic devices. Over the past years much effort has been put into improving their properties. Even though these films are now well optimised for speci ...
Microstructure evolution within the post-dynamic regime following hot deformation was investigated in Inconel 718 samples with different dynamically recrystallized volume fractions and under conditions such that no delta-phase particles were present. In si ...
We implement the C-shaped sample test method and micro-cantilever beam testing to measure the local strength of microscopic, low-aspect-ratio ceramic particles, namely high purity vapor grown a-alumina Sumicorundum (R) particles 15-30 mu m in diameter, kno ...
