Publication

Incoming Wind and Wake Measurements of a Single 2.5 MW Wind Turbine Using Two Nacelle-Mounted Wind LiDARs for Analytical Wake Model Validation

Abstract

The two main effects of a wind turbine wake on those within its region of influence are: first, the wind speed deficit results in a decrease in the power production and second, a more turbulent flow results in higher unsteady structural forces, potentially reducing the lifespan of the turbines. Accurate quantification and modeling of wind turbine wakes is of utmost importance during the planning phase of new wind farms in order to optimize the layout and to accurately estimate the future power production. Whether wind turbine wake models are analytical, numerical, empirical, or a mixture, they need to be validated with experimental data. Wind tunnel experiments present some advantages for validation purposes (e.g. repeatability, flow control, wind turbine control, wind farm layout, etc.) although incomplete similarity limits the validity of the comparison. Ideally, model validation would be complemented with measurements of full-scale wind turbine wakes. The measurement technique that likely provides the most complete characterization of the wake is pulsed wind LiDAR, due to the relatively high spatial and temporal resolutions that can be achieved with a maximum measurement range up to a few kilometers. We will present preliminarily analysis from a measurement campaign that uses two nacelle-mounted, pulsed scanning LiDARs. The first LIDAR is oriented upwind to characterize vertical profiles of wind speed, wind direction, and yaw angle, as well as longitudinal and transversal turbulence intensity. The second LiDAR is oriented downwind to measure the horizontal field of the longitudinal wind in the wake region, including the average and standard deviation of the wind as shown in the left part of the figure below. The far wake of a wind turbine is defined by the self-similarity of the velocity deficit profile, which has been shown to follow a Gaussian shape. Fitting a Gaussian function to the velocity deficit allows for the study of the near wake length and the evolution of the maximum velocity deficit as well as the wake width at different distances downstream of the wind turbine. The results demonstrate the advantage of the dual LiDAR setup and possible data treatment. The full-scale measurements can help us to understand how higher atmospheric turbulence conditions result in a shortened length of the near wake and increased growth rate of the far wake. Data from the full-scale experiment are presented in the right part of the figure, together with results from validated LES simulations and a wind tunnel experiment, and can be used to validate analytical wake models [1,2] derived from the laws of conservation of mass and momentum and assuming a Gaussian distribution for the wake velocity deficit. [1] M. Bastankhah and F. Porté-Agel. A New Analytical Model For Wind-Turbine Wakes, in Renewable Energy, vol. 70, p. 116-123, 2014. [2] M. Bastankhah and F. Porté-Agel. Experimental and theoretical study of wind turbine wakes in yawed conditions. Journal of Fluid Mechanics, 806, 506–541, 2016. Figure caption: the left part of the figure presents an example of the reconstruction of the wake of a 2.5 MW wind turbine for a period of 30 minutes in terms of the longitudinal velocity deficit (top) and the local longitudinal turbulence intensity (bottom) for low turbulence inflow conditions. The right part of the figure presents the relationship of the spanwise wake growth rate (top) and the length of the near wake (bottom) with the longitudinal turbulence intensity. The setup and technique used do not allow to calculate near wake lengths shorter than 2D. This is represented by the shaded region on the bottom right part of the figure.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (35)
Wind turbine
A wind turbine is a device that converts the kinetic energy of wind into electrical energy. , hundreds of thousands of large turbines, in installations known as wind farms, were generating over 650 gigawatts of power, with 60 GW added each year. Wind turbines are an increasingly important source of intermittent renewable energy, and are used in many countries to lower energy costs and reduce reliance on fossil fuels.
Wind farm
A wind farm or wind park, also called a wind power station or wind power plant, is a group of wind turbines in the same location used to produce electricity. Wind farms vary in size from a small number of turbines to several hundred wind turbines covering an extensive area. Wind farms can be either onshore or offshore. Many of the largest operational onshore wind farms are located in China, India, and the United States. For example, the largest wind farm in the world, Gansu Wind Farm in China had a capacity of over 6,000 MW by 2012, with a goal of 20,000 MW by 2020.
Wind power
Wind power is the use of wind energy to generate useful work. Historically, wind power was used by sails, windmills and windpumps, but today it is mostly used to generate electricity. This article deals only with wind power for electricity generation. Today, wind power is generated almost completely with wind turbines, generally grouped into wind farms and connected to the electrical grid. In 2022, wind supplied over 2000 TWh of electricity, which was over 7% of world electricity and about 2% of world energy.
Show more
Related publications (227)

Towards an improved understanding of wind turbine wakes in complex terrain

Arslan Salim Dar

In this thesis, we explored the effect of certain terrain-induced flow phenomena on the development of wind turbines sited in complex terrain. A combined experimental and analytical approach is used to study wind turbine wakes in different types of complex ...
EPFL2024

Improvements to the dynamic wake meandering model by incorporating the turbulent Schmidt number

Fernando Porté Agel, Peter Andreas Brugger, Corey Dean Markfort

Predictions of the dynamic wake meandering model (DWMM) were compared to flow measurements of a scanning Doppler lidar mounted on the nacelle of a utility-scale wind turbine. We observed that the wake meandering strength of the DWMM agrees better with the ...
2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...
IOPscience2024
Show more
Related MOOCs (6)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.