Onboard Flow Visualization in a Pelton Turbine Bucket
Related publications (32)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The paper below is a follow up of the authors contribution to the IAHR 2002, in which the simulations of the flow through Pelton buckets were presented. In 2002, a good consistency between the predicted and measured efficiency was presented. This paper wil ...
International Association For Hydraulic Research2004
The design of Pelton turbines has always been more difficult than that of reaction turbines, and their performances lower. Indeed, the Pelton turbines combine 4 types of flows: (i) confined, steady-state flow in the piping systems and injector, (ii) free w ...
Free surface flows are extremely complex and appear in various cases such as chemistry, oceanography, thermodynamics and turbomachinery. Their complexity is due to the fact that they are composed of two distinct phases which are only separated by a thin in ...
The penetration of a jet of fluid into a traversal moving stream is a basic configuration of a wide range of engineering applications, such as film cooling and V/STOL aircrafts. This investigation examines experimentally the effect of blowing ratio of fans ...
American Soc Mechanical Engineers, Three Park Avenue, New York, Ny 10016-5990 Usa2010
The dissipation of energy of flood discharges from water releasing structures of dams is often done by plunging jets diffusing in water and impacting on the riverbed downstream. The construction of expensive concrete structures for energy dissipation can b ...
This paper deals with flow investigations using endoscopes in a single-injector reduced scale Pelton turbine performed with a CMOS high-speed camera. Both onboard and external visualizations techniques of the flow in a bucket are presented. The flow observ ...
The flow in the Pelton turbine bucket is three-dimensional, unsteady, turbulent, features a free surface, and is influenced by the rotation-induced forces. It is therefore difficult to investigate how the energy transfer takes place between the water flow ...
International Association For Hydraulic Research2004
Carbon-13 labelled methane was injected into the outer divertor during a series of H-mode discharges on the last day of operations with the JET MkII-SRP divertor. Tiles from around the vessel were removed during the subsequent shutdown and surface deposits ...
The aim of this study was to provide a complete experimental and numerical analysis of the flow in a rotating Pelton bucket. For the experimental analysis, several functioning points have been used in order to study differences which may occur in various s ...
International Association For Hydraulic Research2002
The aim of the paper is to present the results of investigations conducted on the free surface flow in a Pelton turbine model bucket. Unsteady numerical simulations, based on the two-phase homogeneous model, are performed together with wall pressure measur ...