Miniaturized tube fixed plug drawing: determination of the friction coefficients and drawing limit of 316 LVM stainless steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...
A microstructural analysis and tensile tests were performed on two oxide dispersion strengthened ferritic/martensitic steels. Dispersion hardening represents an interesting approach to improve the mechanical properties at elevated temperatures, as they are ...
Tensile properties have been investigated on the low activation F82H ferritic/martensitic steels for both unirradiated and irradiated material. The irradiations have been carried out with protons of medium energy (590 MeV) at the PIREX facility and doses f ...
P>The role of fat content and type of surfactant for oral friction processes and texture perception of oil-in-water emulsions was assessed. Emulsions at 22% and 33% fat content containing either sodium caseinate or a sucrose ester as emulsifier were compar ...
Friction modeling of a high-precision positioning system using linear permanent magnet synchronous motors is investigated. The friction force is measured precisely by some specific experiments to eliminate the parasitic ripple force. The experimental data ...
The microstructure and tensile behavior of pure single crystalline Ni irradiated to low doses at room temperature with 590 MeV protons are investigated. Tensile tests performed at room temperature show radiation induced hardening, which increases with incr ...
The influence of neutron irradiation on microstructural evolution and mechanical properties of mono- and polycrystalline molybdenum and its alloys has been investigated. Tensile specimens and 3 mm diameter discs of monocrystals of pure molybdenum and Mo-5% ...
On-site distributed strain measurements using an original Brillouin analyser were performed on cables using standard tensile test bench and on critical installations in the Swiss telecom network. ...
