Effect of Ions and Admixtures on the Growth of Synthetic Calcium Silicate Hydrate (C-S-H)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...
Supplementary cementitious materials (SCMs) are widely used to partially replace portland clinker in blended cements. Reducing clinker contents further without compromising the development of early strength necessitates a better assessment and enhancement ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
This study investigates the coupled substitution of metakaolin and limestone in Portland cement (PC). The mechanical properties were studied in mortars and the microstructural development in pastes by X-ray diffraction, thermogravimetry analysis, mercury i ...
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...
The modelling platform mu ic [1] has been used to investigate the mechanisms occurring during the hydration of alite. It is shown that it is possible to obtain a good simulation of the hydration kinetics through the implementation of two mechanisms: a diss ...
Calcium-containing slag material is produced in iron- and steelmaking worldwide, including Finland. One process route utilizing this calcium, being developed towards large-scale application, is the so-called slag2pcc concept. Using ammonium salts, up to 50 ...
Villigen PSI, World Resources Forum, printed by Paul Scherrer Institute2015
Chloroethenes are the most prevalent groundwater contaminants in developed countries. They accumulate in the environment as a dense non aqueous phase liquid (DNAPL) which acts as a long term source of contamination. Enhanced in situ anaerobic bioremediatio ...
Background/Objectives. Chloroethenes such as tetrachloroethene (PCE) and trichloroethene (TCE) are among the most prevalent contaminants in groundwater due to their extensive use in industrial processes. In situ bioremediation (ISB) is an attractive techno ...
