Publication

Effect of Ions and Admixtures on the Growth of Synthetic Calcium Silicate Hydrate (C-S-H)

Related publications (46)

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Atomic-Level Structure and Thermodynamic and Kinetic Modelling of Zinc-Modified C-S-H

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

Effect of alkali, aluminium and equilibration time on calcium-silicate-hydrates

Yu Yan

Calcium silicate hydrate (C-S-H) is the main hydration product in Portland and blended cements, and greatly affects durability and mechanical properties of the hydrated cement. In the presence of Al-rich supplementary cementitious materials (SCMs), C-(A-)S ...

EPFL2022

Al uptake in calcium silicate hydrate and the effect of alkali hydroxide

Karen Scrivener, Barbara Lothenbach, Yan Yan

The effect of Al and of pH on the structure of calcium silicate hydrate (C-S-H), the most important hydration product in Portland and blended cement, was studied at Ca/Si similar to 1.0. The presence of Al led to higher amounts of secondary phases, larger ...

PERGAMON-ELSEVIER SCIENCE LTD2022

The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion

Karen Scrivener, Barbara Lothenbach, Mahsa Bagheri

The reaction kinetics of the alkali silica reaction depends on the composition of the pore solution. The evolution of the pore solution composition in different cement pastes and concretes was studied. Pastes containing silica fume or metakaolin had the lo ...

SPRINGER2022

Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)

Karen Scrivener, Barbara Lothenbach, Yu Yan, Émilie Michèle L'Hôpital, Sheng-Yu Yang

This paper investigates the effect of KOH and NaOH on C-S-H structure and solubility. Both KOH and NaOH have a similar effect, they increase pH values and silicon concentrations, and decrease calcium concentrations. At higher alkali hydroxide concentration ...

PERGAMON-ELSEVIER SCIENCE LTD2022

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021

The effect of sodium hydroxide on Al uptake by calcium silicate hydrates (C S H)

Christian Ludwig, Barbara Lothenbach, Sonya Barzgar, Mohamed Tarik, Alessio Di Giacomo

To reduce the CO2 emissions from cement production, Portland cement (PC) is partially replaced by supplementary cementitious materials (SCM). Reactions of SCM with PC during hydration leads to the formation of CSH with more silicon and aluminum than in PC, ...

2020

Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics

Franco Alberto Zunino Sommariva

Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...

EPFL2020

Influence of pH on the chloride binding capacity of Limestone Calcined Clay Cements (LC3)

Karen Scrivener, François Henri Avet

The high solution to solid ratio normally used for the measurement of chloride binding isotherms, leads to a leaching of ions and a decrease of pH. To make binding test more representative of on-site conditions, we investigated the influence of the increas ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.