Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
Titanium alloys have been identified as candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elastic mo ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
The microstructure and tensile behavior of pure single crystalline Ni irradiated to low doses at room temperature with 590 MeV protons are investigated. Tensile tests performed at room temperature show radiation induced hardening, which increases with incr ...
An original set-up has been used to study the mechanical properties of aluminium alloys in tension during solidification with a high cooling rate (70 K/s). The mechanical behaviour of 6056 aluminium alloy with and without grain refiner has been investigate ...
The rheological behavior of a solidifying alloy is modeled by considering the deforming material as a viscoplastic porous medium saturated with liquid. Since the solid grains in the mush do not form a fully cohesive skeleton, an internal variable that repr ...
Microstructure and chemical composition of the hard Ni–P–Ti layer formed on the Ti–6Al–4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high resolution transmissio ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
We have fabricated and tested infrared scanning near-field optical microscope (IR-SNOM) probe tips made from singlemode chalcogenide fiber. The process used to create the tips was similar to conventional micropipette-puller techniques, with some modificati ...
A series of polyquasicrystalline ingots with the nominal composition Al63.6Cu24.0Fe12.4 has been prepared by conventional drop casting and subsequent annealing at 1088 K for 24 h. Compression specimens prepared from the different ingots have been deformed ...
