Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Nanostructured materials should present a good resistance to irradiation because the large volume fraction of grain boundaries can be an important sink for radiation-induced defects. The objective of the present study is to experimentally investigate the i ...
We report findings of large metal grains (~150 um) with distinct zoning patterns in Ni, Co, Cr, and Si in CH chondrites which are consistent with a condensation origin from a gas of solar composition. ...
The solidification of eutectic alloys has been described by means of stochastic methods. These methods allow some of the hypotheses which are usually made in deterministic models to be relaxed, in particular those related to the description of grain imping ...
The effect of the bulk microstructure (grain size distribution, grain boundary composition on the oxygen transport properties of La0.5Sr0.5FeO3membranes was investigated. For this purpose, samples with different microstruct ...
The effect of the bulk microstructure (grain size distribution, grain boundary length) on the oxygen transport properties of permeation membranes is investigated in this work. For this purpose, La0.5Sr0.5FeO3-? samples with different microstructures have b ...
In the first part of this work a comprehensive model of the continuous hardening of 3D-axisymmetric steel components by induction heating has been developed. In the model, the Maxwell and heat flow equations are solved using a mixed numerical formulation : ...
Hot tear formation has been observed during the solidification of a succinonitrile–acetone (SCN-acetone) alloy by pulling the columnar dendrites in the transverse direction with a stick. It is observed that the cracking of the mushy zone (hot tears) always ...
Semi-continuous direct-chill (DC) casting of aluminium ingots suffers from a very frequent defect which can lead to a strong decrease in productivity: hot tearing. This phenomenon takes place in the mushy state (i.e., at solid fractions, gs, lower than uni ...
