Characterization of Efficiency and Mechanisms of Cold Atmospheric Pressure Plasma Decontamination of Seeds for Sprout Production

The consumption of fresh fruit and vegetable products has strongly increased during the past few decades. However, inherent to all minimally processed products is the short shelf life, and the risk of foodborne diseases, which have been increasingly related to such products in many parts of the world. Because of the favorable conditions for the growth of bacteria during the germination of seeds, sprouts are a frequent source for pathogenic bacteria, thus highlighting the need for seed decontamination to reduce the risk of foodborne illness. Consequently, this study focused on cold atmospheric pressure plasma (CAPP) treatment of artificially inoculated seeds in a diffuse coplanar surface barrier discharge to determine the inactivation efficiency for relevant foodborne pathogens and fungal spores. Plasma treatment of seeds resulted in a highly efficient reduction of microorganisms on the seed surface, while preserving the germination properties of seeds, at least for moderate treatment times. To characterize the mechanisms that contribute to microbial inactivation during plasma treatment, an experimental setup was developed to separate ultraviolet light (UV) and other plasma components. The combination of bacterial viability staining with confocal laser scanning microscopy was used to investigate the impact of ozone and other reactive species on the bacterial cells in comparison to UV. Further characterization of the effect of CAPP on bacterial cells by atomic force microscopy imaging of the same Escherichia coli cells before and after treatment revealed an increase in the surface roughness of treated E. coli cells and a decrease in the average height of the cells, which suggests physical damage to the cell envelope. In conclusion, CAPP shows potential for use as a decontamination technology in the production process of sprouts, which may contribute to food safety and prolonged shelf life of the product.

Time-lapse high-resolution microscopy to study the morphogenesis of microorganisms

Mélanie Thérèse Marie Hannebelle

Mycobacterium tuberculosis, the etiological agent for the tuberculosis disease, is a bacterial pathogen thought to infect about a quarter of the global human population. It is the first cause of death among infectious diseases, and is most prevalent in low-income populations. Much remains unknown about how these bacteria grow, divide, and manage to persist in the host even during month-long antibiotic treatments. Bacteria are typically at the edge of the spatial resolution that conventional optical microscopy techniques can offer, and so new tools are required to study bacterial substructures or surface morphologies with nanometer resolution. We developed a platform for automated optical microscopy and atomic force microscopy (AFM) in order to study the morphogenesis of mycobacteria. What is the growth dynamics of mycobacteria? Opposite models coexist in the literature for the pole growth dynamics of mycobacteria: the unipolar model and the bipolar model. We show that the growth dynamics of mycobacteria follows a new end take off NETO model. There is a surprising similarity between the NETO growth dynamics of mycobacteria and of fission yeast, which hints at shared mechanisms for pole growth in evolutionarily distant pole growing organisms. How do pole-growing organisms maintain their shape through insertion of new cell wall material at the tip? To explore further pole growth morphogenesis, we developed a method for imaging with AFM the pole of a growing rod-shaped microorganism. We observed the formation of a stiff fibril mesh on the pole of fission yeast cells, and showed that this mesh is stretched as the cell grows and insert new cell wall material at the tip. How do mycobacteria divide into two sibling cells? Another essential aspect of morphogenesis of rod-shaped cell is the division of a mother cell into two sibling cells. Using AFM, we measured the relative contributions of mechanical forces and molecular mechanisms driving the division process in mycobacteria. We showed that there is a concentration of mechanical stress at the future division site, using a combination of COMSOL finite element modeling and AFM measurements while controlling the cell turgor pressure. The accumulation of mechanical stress, in combination of enzymatic activity, ultimately leads to mechanical fracture and separation of the sibling bacteria. Conventional optical microscopy techniques tend to have low resolution and high speed, while conventional AFMs have comparatively high resolution and low speed. We designed and built a 3D-printed structured illumination (SIM) module, the openSIM, as an add-on for fluorescence microscopes. It provides structured illumination to obtain SIM images with higher resolution. With the aim of improving the imaging speed of AFM, we implemented photothermal actuation in a tip-scanning AFM head, and quantified the design constraints for high-speed photothermal off-resonance tapping imaging. AFM is most often used to scan and acquire high-resolution images of a sample. Its nanometer precision make it a unique tool for other applications. We combined an AFM head with a volcano-shaped probe for electrogram measurements, and demonstrated simultaneous recording of extracellular field potentials and contraction of the cell. This new tool opens the way for future studies exploring the intriguing links between mechanobiology and electrophysiology, with single-cell resolution.

EPFL2020

Localization of adhesins on the surface of a pathogenic bacterial envelope through atomic force microscopy

Sandor Kasas, Giovanni Longo, Petar Stupar

Bacterial adhesion is the first and a significant step in establishing infection. This adhesion normally occurs in the presence of flow of fluids. Therefore, bacterial adhesins must be able to provide high strength interactions with their target surface in order to maintain the adhered bacteria under hydromechanical stressing conditions. In the case of B. pertussis, a Gram-negative bacterium responsible for pertussis, a highly contagious human respiratory tract infection, an important protein participating in the adhesion process is a 220 kDa adhesin named filamentous haemagglutinin (FHA), an outer membrane and also secreted protein that contains recognition domains to adhere to ciliated respiratory epithelial cells and macrophages. In this work, we obtained information on the cell-surface localization and distribution of the B. pertussis adhesin FHA using an antibody-functionalized AFM tip. Through the analysis of specific molecular recognition events we built a map of the spatial distribution of the adhesin which revealed a non-homogeneous pattern. Moreover, our experiments showed a force induced reorganization of the adhesin on the surface of the cells, which could explain a reinforced adhesive response under external forces. This single-molecule information contributes to the understanding of basic molecular mechanisms used by bacterial pathogens to cause infectious disease and to gain insights into the structural features by which adhesins can act as force sensors under mechanical shear conditions.

Royal Society of Chemistry2015

Dynamic measurement of the height and volume of migrating cells by a novel fluorescence microscopy technique

Lara Buscemi Estefanell, Chiara Gabella, Jean-Jacques Meister, Benoît Vianay

We propose a new technique to measure the volume of adherent migrating cells. The method is based on a negative staining where a fluorescent, non-cell-permeant dye is added to the extracellular medium. The specimen is observed with a conventional fluorescence microscope in a chamber of uniform height. Given that the fluorescence signal depends on the thickness of the emitting layer, the objects excluding the fluorescent dye (i.e., cells) appear dark, and the decrease of the fluorescent signal with respect to the background is expected to give information about the height and the volume of the object. Using a glass microfabricated pattern with steps of defined heights, we show that the drop in fluorescence intensity is indeed proportional to the height of the step and obtain calibration curves relating fluorescence intensity to height. The technique, termed the fluorescence displacement method, is further validated by comparing our measurements with the ones obtained by atomic force microscopy (AFM). We apply our method to measure the real-time volume dynamics of migrating fish epidermal keratocytes subjected to osmotic stress. The fluorescence displacement technique allows fast and precise monitoring of cell height and volume, thus providing a valuable tool for characterizing the three-dimensional behaviour of migrating cells.

2011

Time-lapse high-resolution microscopy to study the morphogenesis of microorganisms

Mélanie Thérèse Marie Hannebelle

EPFL2020