An electron acceptor molecule in a nanomesh: F(4)TCNQ on h-BN/Rh(111)

The adsorption of molecules on surfaces affects the surface dipole and thus changes in the work function may be expected. The effect in change of work function is particularly strong if charge between substrate and adsorbate is involved. Here we report the deposition of a strong electron acceptor molecule, tetrafluorotetracyanoquinodimethane C12R4N4 (F(4)TCNQ) on a monolayer of hexagonal boron nitride nanomesh (h-BN on Rh(111)). The work function of the F(4)TCNQ/h-BN/Rh system increases upon increasing molecular coverage. The magnitude of the effect indicates electron transfer from the substrate to the F(4)TCNQ molecules. Density functional theory calculations confirm the work function shift and predict doubly-charged F(4)TCNQ(2-) in the nanomesh pores, where the h-BN is closest to the Rh substrate, and to have the largest binding energy there. The preferred adsorption in the pores is conjectured from a series of ultraviolet photoelectron spectroscopy data, where the a bands in the pores are first attenuated. Scanning tunneling microscopy measurements indicate that F(4)TCNQ molecules on the nanomesh are mobile at room temperature, as "hopping" between neighboring pores is observed.

Design of Surface-Supported Bio-inspired Networks for CO2 and O2 Activation at Room Temperature

Daniel Eduardo Hurtado Salinas

The structure of a biological system defines its function. Therefore, nature has developed sophisticated systems that catalyze chemical reactions that are vital for life on earth. For instance, the photosynthesis is a biological process that is partially regulated by the metallo-enzyme RuBisCO (Ribulose-1,5-bisphosphate carboxylase/oxygenase), whose function is to catalyze the capture and transfer of CO2 into organic molecules. This carboxylation reaction occurs at the active site, where a magnesium ion (Mg2+) is bound to organic molecules with carboxylate (COO-) and amine (NH2) functional groups. In the last decades, supramolecular chemistry has proven to be a valid approach to replicate the structural characteristics of these natural metal-organic systems. Metal atoms and organic molecules are used as building blocks to form two-dimensional (2D) metal-organic networks (MONs) on metal surfaces, through a self-assembly process that occurs spontaneously. In these systems the molecules bind to the metal centers and control their oxidation states that, as found in metallo-enzymes, is crucial to perform a catalytic task. Therefore, these supramolecular assemblies show promising features to be explored for heterogeneous catalysis. The main objective of this thesis is to reverse the structure-function equation, that is: instead of finding specific functions of well-known 2D structures for future applications, 2D structures are designed to reproduce the specific functions of well-known bio-systems. Thus, inspired in the structure of the active site of RuBisCO, 2D Mg-based supramolecular assemblies are rationally designed on Cu(100) or Mg(0001) surfaces at room temperature (RT) as a platform for CO2 adsorption. This work is the first study of self-assembly of alkaline earth metal atoms (Mg) with organic molecules ((1,4-benzenedicarboxylic acid (TPA) and 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT)) on metal surfaces. The first part of this thesis investigates the self-assembly of TAPT molecules. Scanning Tunneling Microscopy (STM) and High Resolution X-ray Photoemission Spectroscopy (HR-XPS) demonstrate that the molecules typically semi-deprotonate to form MONs with the adatoms from the host substrates. The exposure of these structures to CO2 results in the carboxylation of the amino groups. The second part proves that the COOH moieties of TPA molecules fully-deprotonate to form homo-molecular structures. The incorporation of Mg adatoms result in ionic MONs, which reproduce the carboxylate environment of the active site of RuBiSCO. STM, XPS and Density Functional Theory (DFT) analyze the structural changes, the chemical reactions and charge transfer during either the CO2 or O2 adsorption on the Mg2+ centers. The last part focusses on the co-deposition of both molecules to form 2D metallic-hetero-molecular networks with Mg2+ centers. The role of the Mg2+ centers as active sites for molecular adsorption and model systems for gas storage is studied. STM reveals that CO2 partially modifies the network towards a configuration that resembles the active site of RuBisCO. The formation of 3D structures to enhance CO2 adsorption is also evaluated.

EPFL2018

Scanning Tunneling Luminescence of Pentacene Nanocrystals

Alexander Kabakchiev

Organic semiconductors are promising materials for future electronic and electroluminescence applications. A detailed understanding of organic layers and nano-sized crystals down to single molecules can address fundamental questions of contacting organic semiconductors at the nanometer limit and obtaining luminescence from them. In this thesis, electroluminescence spectra from pentacene, a policyclic hydrocarbon (acene), are discussed. The luminescence is induced by the current from the tip of a scanning tunneling microscope (STM). Pentacene is an organic semiconductor which gained a lot of attention in technology because of its electronic properties suitable for applications in thin film devices. Moreover, recent fundamental studies employed pentacene as a standard to demonstrate sub-molecular resolution by scanning probe techniques. This work reports the first observation of light emission from nanometer-sized pentacene crystals grown on an ultrathin insulating layer on noble metal surfaces. Different STM-techniques are combined to characterize the individual systems studied with respect to topography, crystal structure, electronic properties and work function changes. The initial step of the project was the implementation of an optical system for light collection from the tunnel-junction of a low-temperature STM. In the set-up, a novel approach based on the use of in situ adjustable lenses has been realized. Three lenses placed in the vicinity of the tip-apex allow light collection into three independent channels which can be used for versatile optical analysis. An important part in the characterization of the organic system was to clarify the interaction between adsorbed molecules and substrates. We investigated individual pentacene molecules on different ultrathin insulator-metal systems. With the STM tip in tunnel contact, the molecules are situated in a double barrier junction formed by the insulating layer on one side and the vacuum gap on the other side. The metal surface and the STM-tip form the electrodes. The electronic properties of pentacene in this configuration have been characterized. Insulator-metal-systems, which provide a good electronic decoupling for pentacene from the metal, have been chosen as substrates for the growth of pentacene nanocrystals. Using the sub-molecular resolution of the STM we resolved the structure of the top-layer of the pentacene nanocrystals and found that the crystal phase agrees with the pentacene bulk structure. Moreover, the comparison of charge injection barriers between individual molecules and nanocrystals of pentacene indicates a significant change of electronic properties after the formation of ordered structure from the individual building blocks. Optical spectroscopy of the emitted light reveals an excitonic emission from the nanocrystals, which is in very good agreement with photoemission spectra of macroscopic crystals. Although a highly localized current-injection by the STM tip is used for excitation, it can be concluded that the source of light emission is delocalized. In contrast to luminescence measurements reported for other organic materials in STM, the excitation is not localized on the individual molecule, into which a charge is injected by the STM-tip. Our study indicates the importance of inter-molecular coupling leading to a high mobility of the excited state which has to be considered in the framework of STM-induced luminescence. A further result is the observation of the Stark shift of pentacene luminescence, that has so far not been measured at large electric fields of the order of 1V/nm. The evaluation of the Stark shift provides information on dipole and polarizability change during the decay of an exciton. The measured large dipole change of the lowest singlet exciton in pentacene indicates a mixing of the Frenkel exciton (FE) with a small contribution of charge-transfer (CT). Finally, we developed a set-up for photon correlation measurements in the STM. The properties of photon statistics is a means which can unambiguously prove that the luminescence is due to a single-photon source, i.e. a light source which emits no more than one photon at a time. A typical example of such a source is the emission from a single molecule. We performed photon correlations measurements of the luminescence from pentacene and C60 nanocrystals. While the excitonic bulk emission of pentacene is not expected to represent a single photon emitter, we also did not observe anticorrelations in the case of C60 indicating the importance of the local environment in the STM-junction, e.g. the short distance to the metal electrodes.

EPFL2010

Adsorption of Small Hydrocarbons on the Three-Fold PdGa Surfaces: The Road to Selective Hydrogenation

Harald Brune, Daniele Passerone, Jan Prinz, Roland Widmer

Intermetallic compounds are a promising class of materials as stable and selective heterogeneous catalysts. Here, the (111) and (-1-1-1) single crystal surfaces of the PdGa intermetallic compound were studied as model catalysts with regard to the selective hydrogenation of acetylene (C2H2) to ethylene (C2H4). The distinct atomic surface structures exhibit isolated active centers of single atomic and three atomic Pd ensembles, respectively. For the two prototypal model catalyst surfaces, the adsorption sites and configurations for hydrogen (H-2), acetylene, and ethylene were investigated by combining scanning tunneling microscopy, temperature-programmed desorption, and ab initio modeling. The topmost Pd surface atoms provide the preferred adsorption sites for all studied molecules. The structural difference of the Pd ensembles has a significant influence on the adsorption energy and configuration of C2H2, while the influence of the ensemble structure is weak for C2H4 and H-2 adsorption. To approach the question of catalytic performance, we simulated the reaction pathways for the heterogeneous catalytic hydrogenation of acetylene on the two surfaces by means of density functional theory. Due to the geometrical separation of the Pd sites on the surfaces, the steric approach of the reactants (H and C2Hx) was found to be of importance to the energetics of the reaction. The presented study gives a direct comparison of binding properties of catalytic Pd on-top sites vs three-fold Pd hollow sites and is therefore of major relevance to the knowledge-based design of highly selective hydrogenation catalysts.