Assessment of capillary phenomena in liquid composite molding
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
A systematic study of the effects of charge composition and process parameters is presented for a prototype automotive part (a door cassette) produced by compression moulding from glass fibre and polypropylene composites. This follows previous studies (Par ...
Thermoplastic powder impregnation of continuous reinforcement filaments is studied in this work, focusing on impregnation mechanisms and interfacial phenomena. Various existing techniques to mingle powdered resins to continuous filaments are reviewed; a po ...
The single-fibre-composite (s.f.c) test, in which a fibre is embedded in an epoxy matrix and the composite tested in tension, was employed to obtain the statistical strength distribution of Carborundum SiC ceramic fibres over the range of gauge lengths fro ...
Sandwiches based on stampable foam core and face sheets offer potential for cost-effective applications. Since the formability of such sandwich structures mainly depends on the drapability of the face sheets, the deformation behaviour of several types of t ...
An analytic model for predicting the tensile strength of uniaxial fiber-reinforced composites is applied to several different graphite-fiber composites and shows good agreement with measured strengths. The model includes the effects of fiber statistical st ...
In automotive engineering, the main load bearing structure (Body-in-White, BIW) has traditionally been manufactured using metals such as steel and light alloys. In order to satisfy upcoming European regulations on CO2 emissions, considerable weight reducti ...
The mode I inter-laminar fracture toughness of advanced knitted textile composites was investigated. Two complex weft-knitted glass fabrics were selected for the study: a triple rib knit and a Milano knit were impregnated with a tough epoxy resin and teste ...
The influence of the fiber mat structure and the matrix rheology on the squeeze flow behavior of thermoplastic composites for compression flow molding has been investigated. An analytical model for isothermal squeeze flow has been developed and experimenta ...
The aim of this work is to integrate polypropylene/montmorillonite (MMT) nanocomposite matrices into conventional fibre-reinforced composites. Two types of composite have been considered: long fibre-reinforced composites from co-woven glass fibre and nanoc ...
