The mechanics of crack-tip dislocation emission and twinning
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Hydrogen ingress into a metal is a persistent source of embrittlement. Fracture surfaces are often intergranular, suggesting favorable cleave crack growth along grain boundaries (GBs) as one driver for embrittlement. Here, atomistic simulations are used to ...
The mechanical strength of metals depends on their resistance against various microscopic
deformation processes. In ductile metals, the most important process is shearing of the crystal
lattice by dislocations. One of the fundamental aspects of dislocation ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
The generalized stacking fault energy is a key ingredient to mesoscale models of dislocations. Here we develop an approach to quantify the dependence of generalized stacking fault energies on the degree of chemical disorder in multicomponent alloys. We int ...
Samples from an ultrafine-grained Cu-4.5vol.%Al2O3 nanocomposite rod fabricated by powder compact extrusion were annealed at 400 and 700 degrees C for 15 min respectively, and their microstructure and mechanical properties were investigated. It shows that ...
The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...
The {11-22} and {11-26} twinning modes were recently discovered by Ostapovets et al. [Philos. Mag. (2017), 97, 1088-1101] and interpreted as {10-12}-{10-12} double twins formed by the simultaneous action of two twinning shears. Another interpretation is pr ...
Small disk tensile specimens of the reduced activation tempered martensitic steel Eurofer97 were tested from −100 °C up to 370 °C before and after irradiation in the spallation source SINQ at Paul Scherrer Institute. The calculated irradiation dose and hel ...
A material is intrinsically ductile under Mode I loading when the critical stress intensity K-Ie for dislocation emission is lower than the critical stress intensity K-Ic for cleavage. K-Ie is usually evaluated using the approximate Rice theory, which pred ...
The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...
