Publication

Impact of large tip clearance ratios on the performance of a centrifugal compressor

Related publications (50)

Real-time optimization of load sharing for gas compressors in the presence of uncertainty

Dominique Bonvin, Timm Faulwasser, Alejandro Gabriel Marchetti, Predrag Milosavljevic

This paper investigates the problem of load-sharing optimization of gas compressors in the presence of uncertainty. The objective is to operate a set of compressor units in an energy-efficient way, while at the same time meeting a varying load demand. The ...

ELSEVIER SCI LTD2020

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Jürg Alexander Schiffmann

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

2020

The Role of Reynolds Number Effect and Tip Leakage in Compressor Geometry Scaling at Low Turbulent Reynolds Numbers

Jürg Alexander Schiffmann, Markus Diehl, Christoph Schreiber

In compressor design, a convenient way to save time is to scale an existing geometry to required specifications, rather than developing a new design. The approach works well when scaling compressors of similar size at high Reynolds numbers but becomes more ...

2020

Mitigation of tip leakage induced phenomena in a low Reynolds number centrifugal compressor via blade loading distribution

Markus Diehl

Reduced-scale refrigeration compressors supported on gas-lubricated bearings have been identified as a key technology for domestic heat pump applications, in order to improve both the system efficiency and the reliability. Unfortunately, reduced-scale mach ...

EPFL2019

Metal hydride compressor control device and method

Andreas Züttel, Noris André Gallandat

The present relates to a Metal hydride compressor control method for generating a variable output pressure P_desired_outPut, comprising a first step of inflowing gaseous hydrogen into a metal hydride compartment at a constant temperature and then stopping ...

2019

Potential and Challenges of ORC driven Heat Pumps Based on Gas Bearing Supported Turbomachinery

Violette Mounier

Electrically Driven Heat Pumps (EDHPs) have been identified as a key technology to reduce the energy consumption in the domestic space heating sector. However, since EDHPs require electrical power, they face issues related to network overload at peak-time, ...

EPFL2018

High temperature heat pump using HFO and HCFO refrigerants – System design, simulation, and first experimental results

Jürg Alexander Schiffmann

High temperature heat pumps (HTHPs) with heat sink temperatures in the range of 100 to 160°C are expected to become increasingly commercialized in the coming years. Major applications have been identified, particularly in the food, paper, metal and chemica ...

2018

High Temperature Heat Pumps: Market Overview, Stateof the Art, Research Status, Refrigerants, and Application Potentials

Jürg Alexander Schiffmann

This study reviews the current state of the art of high temperature heat pumps (HTHPs) with heat sink temperatures of 90 to 160°C. The focus is on the analysis of heat pump cycles, suitable refrigerants, and the operating ranges of commercially available H ...

2018

Data-Driven Predesign Tool for Small-Scale Centrifugal Compressor in Refrigeration

Jürg Alexander Schiffmann, Cyril Picard, Violette Mounier

Domestic scale heat pumps and air conditioners are mainly driven by volumetric com-pressors. Yet the use of reduced scale centrifugal compressors is reconsidered due to their high efficiency and power density. The design procedure of centrifugal compressor ...

2018

High temperature heat pumps: Market overview, state of the art, research status, refrigerants, and application potentials

Jürg Alexander Schiffmann

This study reviews the current state of the art and the current research activities of high temperature heat pumps (HTHPs) with heat sink temperatures in the range of 90 to 160°C. The focus is on the analysis of the heat pump cycles and the suitable refrig ...

2018

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.