Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
The microcasting process is a scaled-down investment casting process in which molten metal is pressure-infiltrated and directionally solidified in water-soluble moulds. It was previously developed to produce metallic microwires with a diameter (D) between ...
Strain Hardening Ultra High Performance Fibre Reinforced Concretes (SH-UHPFRC) have a high elastic limit (around 10 MPa) and high tensile strength (up to 20 MPa) and exhibit significant strain hardening (1 to 4 ‰) under tensile loads. Because of these appe ...
The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stres ...
Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...
A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...
Molecular dynamics simulations were performed to study the deformation mechanisms of < 110 >-oriented, faceted Cu and Au nanowires under bending along three different crystallographic directions. Independent of the bending direction, the stress field is ch ...
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
In this work, we investigate the role of hydrocarbons in changing the petrophysical properties of rocks by merging laboratory measurements, outcrops characterization, and subsurface data focusing on a carbonate-bearing reservoir (Bolognano Formation) of th ...
The study was undertaken to gain insight into the micro-mechanisms controlling plasticity at the micrometer scale of elastic-plastic metallic alloys. Dynamic nano-indentation tests, where a small harmonic force amplitude is superimposed during loading, ref ...
