Hydration reactions and stages of clinker composed mainly of stoichiometric ye'elimite
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper is the work of working group 2 of the RILEM TC 238-SCM. Its purpose is to review methods to estimate the degree of reaction of supplementary cementitious materials in blended (or composite) cement pastes. We do not consider explicitly the wider ...
This thesis investigates the replacement of Portland cement by addition of high amounts of calcined clays and limestone. Such ternary blends can become more ecological and economical binders to answer the worldwide housing shortage. It could be demonstrate ...
Calcium silicate hydrate (C-S-H) is the main hydrate phase in Portland cements. Its composition
varies depending on the Ca/Si ratio and on the presence of other ions such as aluminium (called CA-
S-H) or alkalis.
This thesis aimed to study the compositi ...
Tricalcium aluminate (C3A) is one of the main constituents of Portland cement. Even though it represents less than 10% of the total composition, its strong reaction with water can lead to a rapid setting, called flash set. Gypsum is added to regulate this ...
This paper is a keynote presentation from the 13th International Congress on the Chemistry of Cement. It discusses the underlying principles of hydration and recent evidence for the mechanisms governing this process in both Portland cements and other cemen ...
The modeling platform µic has been extended to study the hydration of cement based systems. It is shown that the hydration kinetics of alite can be described through the implementation of two mechanisms: a solution controlled dissolution (SCD) mechanism fo ...
This work aims to clarify the impact of alkali and sulfate on the hydration kinetics and microstructural development of alite. The plain alite system is compared to systems with addition of: i) gypsum, ii) Na2SO4, iii) NaOH plus gypsum and iv) NaOH. In all ...
Thermodynamic modeling is a versatile tool for predicting the chemical composition cement during the hydration of cement. The quality of the thermodynamic modeling depends directly on the quality and completeness of thermodynamic database used. One of the ...
Calcium silicate hydrate (C-S-H) was synthetized at 20 degrees C to investigate the effect of aluminium uptake (Al/Si = 0-0.33) in the presence and absence of alkalis on the composition and the solubility of a C-S-H with a Ca/Si equal to 1.0. C-S-H incorpo ...
Supplementary cementitious materials (SCM) are known to reduce or even stop expansion due to alkali silica reaction (ASR) in concretes with reactive aggregates. Studies indicate that the main reason for this is the decrease in alkalinity of the pore soluti ...
