Electrochemically polymerized poly (3, 4-phenylenedioxythiophene) as efficient and transparent counter electrode for dye sensitized solar cells

A new conducting polymer poly (3, 4-phenylenedioxythiophene) is synthesized by the electrochemical polymerization technique with different solvents. We find that solvents used in electrochemical polymerization play important roles for the catalytic activity and morphology of the formed conducting polymers. The obtained poly (3, 4-phenylenedioxythiophene) is for the first time employed as counter electrode electrocatalyst in dye sensitized solar cells with cobalt-based electrolytes. We demonstrate that a polymer prepared from a mixed acetonitrile-dichloromethane solvent exhibit higher catalytic activity for redox reactions, as compared to that from a single solvent, dichloromethane. The devices based on this mixed solvent-based polymer from a mixed solvents show a high power conversion efficiency of 5.97%. An additional advantageous feature of the electrochemically polymerized poly (3, 4-phenylenedioxythiophene) for solar cell applications is the high transparency in the visible and nearinfrared region. We also investigate the beneficial effect of the poly (3, 4-phenylenedioxythiophene) layer thickness on device performance, and concluded that the series resistance and charge transfer resistance are greatly influenced by the thickness of polymer, as evidenced by electrochemical impedance spectroscopy measurements. The optimal thickness for poly (3, 4-phenylenedioxythiophene) is about 100 nm. Furthermore, the high catalytic activity and transparency of the new conducting polymer as counter electrode shows great promise for other optoelectronic applications. (C) 2019 Published by Elsevier Ltd.

Strategies to Optimizing Dye-Sensitized Solar Cells

Sophie Wenger

Dye-sensitized solar cells (DSCs) constitute a novel class of hybrid organic-inorganic solar cells. At the heart of the device is a mesoporous film of titanium dioxide (TiO2) nanoparticles, which are coated with a monolayer of dye sensitive to the visible region of the solar spectrum. The role of the dye is similar to the role of chlorophyll in plants; it harvests solar light and transfers the energy via electron transfer to a suitable material (here TiO2) to produce electricity — as opposed to chemical energy in plants. DSCs are fabricated of abundant and cheap materials using inexpensive processes (e.g. screen-printing) and are likely to be a significant contributor to the future commercial photovoltaic technology portfolio. The work conducted during this thesis aimed at optimizing the DSC using three different strategies: The use of versatile organic sensitizers for stable and efficient DSCs, the study of tandem device architectures in combination with other solar cells to harvest a larger fraction of the solar spectrum, and the development of a validated optoelectric model of the DSC. Organic donor-π-acceptor dyes are an interesting alternative to the standard metal-organic complexes used in DSCs. Efficient photovoltaic conversion and stable performance could be demonstrated with three classes of donor systems, namely diphenylamine, difluorenylaminophenyl, and π-extended tetrathiafulvalene. The highest conversion efficiencies were obtained with a difluorenylaminophenyl donor system (η = 8.3 % with a volatile electrolyte and η = 7.6 % with a solvent-free ionic liquid, which was a new record for organic dyes at the time of publication). Surprisingly, efficient regeneration of the oxidized dye by the I-/I3- redox mediator was found with the π-extended tetrathiafulvalene system, even though the thermodynamic driving force was as low as 150 mV. So far driving forces of 300-500 mV had been regarded as necessary for efficient regeneration of the dye cation. Also, important structure-property relationships pertaining to the recombination of electrons with the electrolyte and to the stability of the device could be identified (i.e. effect of linear vs. branched structure, linker length, and moieties used). The power conversion efficiency of solar cells can be extended beyond the limit for a single cell (∼ 30 %) by using multiple cells with different optical gaps in a tandem device. DSCs and chalcopyrite Cu(In,Ga)Se2 (CIGS) solar cells have complementary optical gaps and are thus suitable systems for integration in a tandem device. It was shown that a monolithic DSC/CIGS tandem device has the potential for increased efficiency over a mechanically stacked device due to increased light transmission to the bottom cell, and a monolithic DSC/CIGS device with an initial efficiency of η = 12.2 % was demonstrated. The degradation of the devices — induced by the corrosion of the CIGS cell in contact with the I-/I3- redox mediator — could be retarded with a protective thin conformal ZnO/TiO2 oxide layer coated on the CIGS cell by atomic layer deposition. Finally, an experimentally validated optical and electrical model of the DSC has been developed to assist the optimization process, which is predominantly conducted by empirical means in the DSC research community. The optical model allows to accurately calculate the internal quantum efficiency of devices, i.e. the ratio of extracted electrons to absorbed photons by the dye, a crucial and so far difficult to determine characteristic. Intrinsic parameters — like injection efficiency, electron diffusion length, or distribution of trap states in the TiO2 — can be extracted from experimental steady-state and time-dependent data with the electric model. The model allows to make a comprehensive and quantitative loss analysis of the different optical and electric loss channels in the DSC. The model has been implemented with a graphical user interface for straightforward usage. All three optimization strategies — organic dyes, tandem architecture, and device modeling — developed during this thesis make a valuable contribution to the development and commercialization of inexpensive and high efficiency DSCs. They enable a comprehensive view of the system and pave the way for a systematic analysis and reduction of losses, which has been the ultimate route to success for several established photovoltaic technologies.

EPFL2010

Solar Energy Stored as Hydrogen

Jérémie Minh-Châu Brillet

The tandem photoelectochemical (PEC) cell based on oxide semiconductors for water splitting offers a potentially inexpensive route for solar hydrogen generation. At the heart of the device, a nanostructured photoanode for water oxidation is connected in series with one or two dye-sensitized solar cells (DSCs) that provide an extra bias to photogenerated electrons in order to perform water reduction at the platinum cathode. In Part A of this thesis, after reviewing the different technologies available for solar hydrogen production, I focus on different possible architectures for photoanode / DSC tandem cells enabled by the most recent advances in the field. First, the development of all organic squaraine dyes having a narrow absorption bandwidth extending into the near infrared region and a broad transparent window in the visible region of the spectrum have allowed the design of a new photoanode / DSC / DSC tandem architecture. The "Back DSC" tandem cell, where two DSCs placed side-byside exploit the photons transmitted by a single photoanode is the conventional architecture. In this thesis, I demonstrate the inverted "Front DSC" architecture, which allows the use of non-transparent lower cost metallic substrate for the photoanode, as well as the "tri-level" tandem cell where a panchromatic "black" dyebased DSC exploits the energy transmitted by the photoanode and the squaraine dyebased DSC. Opto-electronic studies on each of these three architecture are performed and the respective solar-to-hydrogen conversion (STH) efficiencies of 1.16 %STH, 0.76 %STH and 1.36 %STH are assessed. Finally, I leverage recent findings in the field of high voltage DSCs to demonstrate for the first time a tandem cell using only one photovoltaic cell to perform complete water splitting at efficiencies as high as 3.10 % STH. Such a result represents a ten-fold improvement over previous demonstrations with this class of device. This work describes a breakthrough in the inexpensive solar-to-chemical conversion using improved photon management in a dual-absorber tandem cell and undoubtedly constitutes a benchmark for solar fuel production by solution processable oxide-based devices. In Part B, I focus on the photoanode for the oxygen evolution reaction. Hematite (α-Fe2O3) is a great candidate material for this application due to its availability, low cost, non-toxicity and appropriate band gap allowing extensive absorption in the visible part of the spectrum. However, it suffers severe drawbacks, among which are poor majority carrier conductivity and a short diffusion length of minority charge carrier with regard to photon penetration depth. This circumstance causes most photogenerated charges to have a low probability of reaching the semiconductor / liquid junction and thus to participate in the water oxidation reaction. This feature implies the use of hematite morphologies having feature size in the range of 10-20 nm. A solution-based colloidal approach offers a simple and easily scalable method to obtain nanostructured hematite. However, this type of nanostructure needs to be exposed to an annealing step at 800 °C to become photoactive. This has been attributed to the diffusion of dopants from the substrate. In addition, this annealing step sinters the 10 nm particles colloid into a feature size approaching 100 nm. Here, I first show the effect of intentionally doping this material on the sintering and photoactivity. I then demonstrate a method that allows for the first time to apply high temperature annealing steps while controlling the feature size of the nanoparticles. Such an approach can be applied to any kind of nanostructure. This latter strategy coupled to further passivation of surface states allowed an improvement of the net photoactivity of this type of photoanode by a factor of two. A reproducible net photocurrent exceeding 4 mA.cm-2 was obtained. This result represents the highest performance reported for hematite under one sun illumination. In Part C of this thesis, I present several synthesis methods for titania nanostructures acting as photoanodes in the DSC. In this photovoltaic cell, the electronic loss that is typically discussed is the slow transport induced recombination. Charges recombining before reaching the electrode have a detrimental influence on the photocurrent and photovoltage. Several approaches have been proposed in order to reduce interfacial recombination and improve charge collection in liquid electrolyte and solid state-DSCs (ss-DSCs) including the use of radial collection nanostructures, one-dimensional ZnO and TiO2 nanorods, and nanowires as photoanodes. Even though these approaches show great promise, they have yet to achieve power conversion efficiencies above 5% in liquid electrolyte DSCs and 1.7% in ss-DSCs. In this part of my thesis, I expose results on the strategies I have pursued during the course of my PhD to improve the dynamics in the liquid and ss-DSC. From one dimensional titania nanotube arrays, I have moved to tri-dimensional fibrous network of crystalline TiO2 and more complex host-passivation-guest photoelectrodes.

EPFL2012

Dynamics of Electronic and Ionic Charges in Cyanine Organic Semiconductor Devices

Sandra Christina Jenatsch

Organic semiconductor materials have been widely applied in optoelectronic devices to replace their inorganic counterparts and explore new fields of applications. Due to their high extinction coefficients, chemical tunability and solubility, cyanine dyes are an interesting class of molecules to be employed in organic semiconductor devices. Their beneficial properties have been demonstrated in organic solar cells (OSC), photodetectors and recently in organic light-emitting electrochemical cells (OLEC). The focus of this thesis is to analyse different aspects regarding the dynamics of electronic and ionic charges in cyanine based devices. Models and conclusions are not restricted to cyanine based devices but can potentially be applied in various systems where combined ionic and electronic charges are present. In order to focus on electronic processes in OSCs, a combination of steady-state, transient and impedance analysis is used. It is resolved that trapped charges can be introduced at the dye/hole extracting layer interface by using specific solvents for the cyanine layer fabrication. These measurements also reveal the low hole mobility of cyanine films which in turn limits the possible upper layer thickness in OSCs. A frequently used way to enhance the conductivity of organic semiconductors is the addition of extra charges by chemical doping. This concept is employed for a near-infrared absorbing dye which is used as donor in a bilayer solar cell. The dependence of all figures of merit versus doping concentration and layer thickness is studied in detail. It is found that the performance of the optimised cell is not further improved by doping, but that it presents a good option if thicker layers are required, e.g. on rough substrates. Furthermore, the stability and degradation pathway of the p-doped species is analysed. This information is of general relevance as they also occur after charge transfer at the heterojunction interface of an OSC and during operation of OLECs. The dynamics of ionic charge carriers is separated into two contributions. In a first step, the steady-state diffusion profile of the counter ion within a cyanine/fullerene bilayer structure is scrutinised using different profiling techniques. An unexpected constant ion profile is found throughout the C60 layer. Simultaneously, the potential within the acceptor is measured by the Kelvin probe technique. A mechanism of combined electron and ion transfer from the C60 to the dye and vice versa is proposed which is in agreement with the experimental results. A prerequisite for OLEC operation is the mobility of ionic charge carriers. Their dynamics in cyanine salts under the effect of an external field is therefore studied in such devices. Several methods are developed and applied to characterise the dynamic p-i-n structure in detail, i.e. the position and width of the intrinsic region as well as the doping concentrations in p- and n-doped regions. The combination of all these methods helps to understand the transient behaviour of these cyanine devices but can also be adapted to other OLEC systems. A major drawback of cyanine dyes as emissive material is their low fluorescence quantum yield in solid films. To overcome this restriction and improve the OLEC efficiency, host-guest systems with various visibly emitting dyes are studied. The gain in fluorescence quantum yield in the film can directly be transferred to an increase in external quantum efficiency of the device.

EPFL2017