Load history effects in fibre-reinforced polymer composite materials
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper presents a study on force transfer around openings (FTAO) in cross-laminated timber (CLT) shear walls. To elucidate the load transfer mechanism in CLT walls, this study used finite-element models to study five different CLT shear wall configurat ...
The temperature-dependent flow behavior in nominally binary Al-Mg alloys measured recently (Jobba etal., 2015; Niewczas et al., 2015) is interpreted in the context of a parameter-free solute strengthening model. The recent measurements show consistently hi ...
A study has been conducted to review viscoelastic and foam-constitutive models to describe sport ball response to impact with a rigid cylindrical surface. The impact model was developed to simulate a ball-bat collision. Comparisons were made to actual impa ...
Due to the accumulation of traffic, the railway components are affected by the induced stresses. As a result, the geometry of the railways is degraded over time. The degradation occurs either through the partial loss of the track's geometry or through the ...
A series of three shear panels with transverse reinforcing ratios ranging from 0.23 to 0.68% were tested to failure under reversed cyclic loading. All of the tests showed a reduction in strength of at least 20% with respect to predictions from reliable mon ...
The electro-mechanical sensing properties of freestanding monolayered membranes of dodecanethiol coated 7 nm gold nanoparticles (NPs) are investigated using AFM force spectroscopy and conductive AFM simultaneously. The electrical resistance of the NP membr ...
This study presents a design criterion developed for fatigue strengthening of a 120-year-old metallic railway bridge in Switzerland and presents a pre-stressed un-bonded reinforcement (PUR) system developed to apply the strengthening. The PUR system uses c ...
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
A novel phenomenological model taking into account the creep-fatigue interaction in composite materials’ fatigue performance is introduced in this paper. The model is based on the derivation of a master curve by using existing experimental fatigue data fro ...
The influence of Eigenstresses due to drying shrinkage on the development of residual deformations characterizing the tensile fatigue behavior of concrete is analyzed. During the loading phase the Eigenstresses are locally released around the cracks induci ...
