Numerical Simulations of Pulsating Heat Pipes, Part 1: Modeling
Related publications (55)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
An experimental study on flow boiling pressure drop and heat transfer of a new environmentally friendly refrigerant R1233zd(E), in a parallel multi-microchannel evaporator was carried out. The silicon microchannels evaporator was 10 mm long and 10 mm wide, ...
Synchronized thermal and visual investigation was carried out on a single-turn channel CLPHP using R245fa as the worldng fluid. The tests were carried out at filling ratios from 10 to 90% and heat inputs from 2 to 60 W for vertical and inclined orientation ...
This paper focuses on the unified modeling suite for annular flow that the authors have developed and continue to develop. The annular flow suite currently includes models to predict the void fraction, the entrained liquid fraction, and the wall shear stre ...
A fully dynamic model of a microchannel evaporator is presented. The aim of the model is to study the highly dynamic parallel channel instabilities that occur in these evaporators in more detail. The numerical solver for the model is custom-built and the m ...
As part of the understanding of radiative coupling phenomena with ablation phenom- ena for hypersonic re-entry of Hayabusa or Stardust type of capsules, laboratory tests are very important. Only expansion tubes can reproduce flight conditions at these spee ...
This paper presents a fundamental study of the flow dynamics and heat transfer induced by a slug flow under saturated flow boiling in a circular microchannel. Numerical simulations are carried out by utilizing the commercial CFD solver ANSYS FLUENT v. 14.5 ...
Pulsating heat pipes (PHPs) represent a promising solution for passive on-chip, two-phase cooling of micro-electronics, providing advantages such as a simple construction and operation in any gravitational orientation. Unfortunately, the unique coupling of ...
This paper presents the modeling of the liquid film distribution and heat transfer during convective boiling in horizontal, annular flows to be applied in such applications where non-uniform heat flux occurs. In general, prediction methods in the literatur ...
Two preliminary design concepts for the low T-C. superconductor Toroidal Field coil system of the planned European fusion reactor DEMO were proposed in 2012 by EPFL-CRPP PSI Villigen and ENEA Frascati. The coil consists of eight double layers (DLs) wound u ...
Advances in the development of micro- and nanostructured surfaces have enabled tremendous progress in delineation of mechanisms in boiling heat transfer and have propelled the rapid enhancement of heat transfer rates. This area of research is poised to mak ...