Publication
Numerical Simulations of Pulsating Heat Pipes, Part 1: Modeling
Related publications (55)
Fractures Thermal Energy Storage (FTES)
This project aims at designing a laboratory-scale experiment to investigate the thermal performance of Fractures Thermal Energy Storage (FTES) systems. While previous field tests have focused on creating horizontal planar fractures at shallow depths, none ...
2023Conductive Heat Transfer in Partially Saturated Gas Diffusion Layers with Evaporative Cooling
Sophia Haussener, Felix N. Büchi, Mirco Magnini
Heat transport is an important, though often neglected function of gas diffusion layers (GDLs) of polymer electrolyte membrane fuel cells. Thermal conductivity is a key property, especially in partially water saturated GDLs and when the phase change of wat ...
2022Near-junction microfluidic cooling for high power-density GaN-on-Si electronics: A wafer, device, packaging, and system-level investigation
Remco Franciscus Peter van Erp
Electrification of the energy section, from generation to end-use, plays an essential role in reducing global CO2 emission. Innovations in power electronics are required to increase conversion efficiency and power density. Gallium nitride (GaN) transistors ...
EPFL2022Simulation and experimental validation of pulsating heat pipes
John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo
The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...
PERGAMON-ELSEVIER SCIENCE LTD2021Multiphase transport and evaporative cooling in fuel cell gas diffusion layers
The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...
EPFL2021Fundamental study on microlayer dynamics in nucleate boiling
Dynamics of nucleate boiling are strongly affected by the formation and behaviour of the microlayer, a layer of liquid underneath growing bubbles. As a result of its minute thickness, very high heat fluxes occur within the microlayer and its evaporation co ...
EPFL2021Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design
The paper presents a comprehensive review of fundamentals and engineering applications of CO2 flow boiling heat transfer, flow patterns and two-phase pressure drops in macro- and micro-channel evaporators. First, distinctions of macro- and micro-channels a ...
PERGAMON-ELSEVIER SCIENCE LTD2021Thermomechanical behavior of underground energy infrastructures
The employment of geostructures as structural supports and as heat exchangers represent an effective, renewable and sustainable way to satisfy thermal needs of the built environment. The structural support of conventional geotechnical structures is coupled ...
EPFL2020Gravity-Independent Oscillate Boiling
Heat transfer in nucleate boiling relies on the detachment and rise of the boiling bubble, in which gravity plays the dominant role. Previous studies showed that in the absence of gravity, the bubble fails to rise, causing the dryout of the heater and sign ...
SPRINGER2019AIM 2019 Challenge on Image Extreme Super-Resolution: Methods and Results
Liying Lu, Majed El Helou, Ruofan Zhou, Xin Yang, Wei Li, Radu Timofte, Jia Yu, Muhammad Haris, Peng Yi, Jiayi Ma, Hanwen Liu
This paper reviews the AIM 2019 challenge on extreme image super-resolution, the problem of restoring of rich details in a low resolution image. Compared to previous, this challenge focuses on an extreme upscaling factor, x16, and employs the novel DIVerse ...
IEEE COMPUTER SOC2019