The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading
Related publications (59)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Variant selection is commonly observed in martensitic steels when a stress is applied to the material during transformation. Classically, the selection phenomenon is modelled considering the work of the shape strain in the applied stress field. This shape ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The mechanical strength of metals depends on their resistance against various microscopic
deformation processes. In ductile metals, the most important process is shearing of the crystal
lattice by dislocations. One of the fundamental aspects of dislocation ...
The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
The austenite/martensite (fcc/bcc) interface is prevalent across many new classes of high-strength steels, and yet both its fundamental structure and its mechanism of motion remain uncertain in spite of decades of research. Here, atomistic simulations are ...
In this study, a miniaturized cruciform-shaped sample geometry which allows reaching high plastic strain under equibiaxial loading with reduced thickness at the test section is presented. The thinning method results in excellent surface quality that can be ...
SPRINGER2019
, ,
It is established that the annealing twin boundaries of austenite act as nucleation sites for the martensitic transformation. In the present study, we observe that in surface martensite the transformation only takes place for twin boundaries that are appro ...
PERGAMON-ELSEVIER SCIENCE LTD2019
, ,
A shape-memory effect is known to appear in red gold alloys with compositions close to Au-Cu. The aim of this paper is to study by electron backscatter diffraction (EBSD) the variant selection in the A1 -> L1(0) transformation occurring under stress, in be ...
INT UNION CRYSTALLOGRAPHY2019
Metallic lithium and sodium are actively investigated as anodes for all solid-state batteries. While the mechanical properties of Li and Na remain poorly understood, there is a growing consensus that they play a crucial role in determining the integrity of ...