Trilinear Model for the Out-of-Plane Seismic Assessment of Vertically Spanning Unreinforced Masonry Walls
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work evaluates the performance of a number of seismic assessment procedures when applied to a case study reinforced concrete (RC) wall building. The performance of each procedure is evaluated through its ability to accurately predict deformation deman ...
The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discret ...
In regions with low to moderate seismicity, unreinforced masonry (URM) is commonly used for the construction of low to mid-rise buildings. When these structures are subjected to seismic loading, the stiff URM walls attract considerable part of the lateral ...
In modern unreinforced masonry buildings with stiff RC slabs, walls of the top floor are most susceptible to out-of-plane failure. The out-of-plane response depends not only on the acceleration demand and wall geom-etry but also on the static and kinematic ...
Modern unreinforced masonry buildings with reinforced concrete slabs are often retrofitted by inserting reinforced concrete walls. The main advantages of this technique are the increase in strength and displacement capacity with respect to masonry structur ...
This paper presents the results of a series of shake-table tests on a half-scale, four-storey building with reinforced concrete (RC) and unreinforced masonry (URM) walls. Due to the lack of reference tests, the seismic behaviour of such mixed structures is ...
This paper contains a seismic assessment at urban scale of the cities of Sion and Martigny in Switzerland. These two cities have been identified for the present research based on their importance regarding size and the characteristics of the building stock ...
When testing multi-storey structures, most testing facilities require the testing of a reduced-scale model. A literature review on tests of scaled masonry structural components revealed that scaling of masonry was rather challenging and often significant d ...
Unreinforced masonry (URM) structures are known to be rather vulnerable to seismic loading. Modern URM buildings with reinforced concrete (RC) slabs might, however, have an acceptable seismic performance for regions of low to moderate seismicity. In partic ...
Previous test data on unreinforced masonry walls focused on the global response of the wall. A new data set (Petry and Beyer 2014a; D01:10.5281/zenodo.8443) on six wall tests, which is publicly available, allows for linking global to local deformations of ...
