Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...
Hafnium Carbide (HfC) is a refractory ceramic known for its exceptional properties, making it suitable for a wide range of applications. This project investigates the potential utilization of HfC in Micro or Nano Electromechanical Systems (MEMS/NEMS) and e ...
The sputtering conditions for the deposition of the layers underneath active AlN films were analyzed for improving the quality of the active AlN, and the dependence of AlN deposition temperature on crystalline quality was investigated, where a reduced depo ...
Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...
Thin film coatings are ubiquitous in modern daily lives, from the semi-conductor industry to aesthetic applications, and rely on the modification of a given material to enhance its surface properties.
At CERN (European Organization for Nuclear Research), t ...
X-ray irradiation is shown to trigger the deposition of Cu from solution, at room temperature, on a wide variety of insulating substrates: glass, passivated Si, TiN/Ti/SiO2/Si and photoresists like PMMA and SU-8. The process is suitable for patterning and ...
In this work, we study MgF2 thin-film synthesis by reactive pulsed DC magnetron sputtering from a metallic magnesium target in a gas mixture of argon, oxygen, and carbon tetrafluoride (CF4). Nanocrystalline films on silicon and glass substrates with excell ...
X-ray irradiation is shown to trigger the deposition of Cu from solution, at room temperature, on a wide variety of insulating substrates: glass, passivated Si, TiN/ Ti/SiO2/Si and photoresists like PMMA and SU-8. The process is suitable for patterning and ...
The small-molecule organic semiconductor 2,9-di-decyl-dinaphtho-[2,3-b: 2',3'-f]-thieno[3,2-b]-thiophene (C-10-DNTT) was used to fabricate bottom-gate, top-contact thin-film transistors (TFTs) in which the semiconductor layer was prepared either by vacuum ...
This work consists in an experimental study of the main parameters governing the transport of heat across an interface between two solids, when it is dominated by phonons. The main experimental tool used is Time-Domain ThermoReflectance (TDTR), which is an ...
