Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The energy ramp and the betatron squeeze at the CERN Large Hadron Collider (LHC) are particularly critical oper- ational phases that involve the manipulation of beams well above the safe limit for damage of accelerator components. In particular, the squeez ...
The operation of the Large Hadron Collider calls for a thorough analysis of the thermo-electric behavior of the 13 kA superconducting bus-bars connecting its dipole and quadrupole main magnets. This presentation reports a synthesis of the work performed jo ...
Superconducting magnets can exhibit training quenches during successive powering to reaching nominal performance. The slip-stick motion of the conductors is considered to be one of the mechanisms of training. In this paper we present a simple quantitative ...
The next generation of superconducting magnets for the interaction regions of particle colliders, as well as for fast cycled accelerators, will be confronted with large heat loads. In order to improve the evacuation of heat from the Nb-Ti coil towards He-I ...
Collimation is essential in a high Energy and Intensity hadron collider with SuperConducting magnets, like the LHC at CERN. To improve the cleaning efficiency and to reduce the LHC impedance budget in stable condition and at top Energy, additional 30 Phase ...
Superconducting magnets submitted to large heat loads, as the low-β quadrupoles for the LHC luminosity upgrade, need the development of new concepts of cable electrical insulation featuring a He-II porous wrapping scheme. This paper reports and discusses r ...
CERN is presently designing a new chain of accelerators to replace the present Proton Synchrotron (PS) complex: a 160 MeV room-temperature H- linac (Linac4) to replace the present 50 MeV proton linac injector, a 3.5 GeV Superconducting Proton Linac (SPL) t ...
The stability is a key issue to design superconducting magnets and to ensure their proper exploitation. This is the case of the imminent operation of the Large Hadron Collider (LHC) accelerator, which requires a good knowledge of the stability margin of it ...
In this thesis we evaluate the potential of the Early Separation Scheme for the Luminosity Upgrade of the Large Hadron Collider (LHC). The main goal of the Early Separation Scheme is to reduce the crossing angle between the proton beams at the collision po ...
New polyimide cable insulation schemes improving the cooling of Nb-Ti superconducting coils were recently developed to face the severe heat loads at which the next generation of superconducting accelerator magnets will work. In order to qualify the new ins ...
