Thermal optimization of shell and tube heat exchanger using porous baffles
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A theoretical and numerical model to predict film condensation heat transfer in mini, micro and ultra micro-channels of different internal shapes is presented in this thesis. The model is based on a finite volume formulation of the Navier-Stokes and energy ...
This paper concentrates on the characterization of the heat flow present during flame cutting of 60 mm thick steel (S355N) flanges, a typical size used in the fabrication of bridge girders. Experimental results are associated with a finite element analysis ...
Heat transfer coefficients for enhanced tubes are typically measured indirectly using the "Wilson plot" method to first characterize the thermal performance of the one side (heating or cooling supply) and then to obtain the heat transfer data for the enhan ...
Xu et al. have recently published a set of results for boiling heat transfer measurements in a multi- channel micro- scale evaporator for flow boiling of acetone in triangular cross- section channels ( hydraulic diameter of 155.4 mm). In the present collab ...
The present report describes the work realized in the frame of a Mas- ter Pro ject in collaboration between the company EnBW Energie Baden- Württemberg AG (Germany) and the Section of Mechanical Engineering of the Swiss Institute of Technology of Lausanne ...
Experimental condensation heat transfer data for the new refrigerant R1234ze(E), trans-1,3,3,3-tetrafluoropropene, are presented and compared with refrigerants R134a and R236fa for a vertically aligned, aluminum multi-port tube. Local condensation heat tra ...
Power Electronic components require cooling to limit junction temperatures to ensure long and reliable operation. Heat sinks are used for cooling the components. In applications which entail operation at altitudes, derating factors are provided by manufact ...
Four sets of experimental data (total of 658 data points) for heat transfer to liquid metals (NaK of different compositions and Hg) flowing in a triangular or square lattice of cylindrical rods with pitch-to-diameter ratios of 1.1 up to 1.95 for a wide ran ...
The tubes in shell-and-tube condensers, widely used in refrigeration and chemical process industries, are subjected to condensate inundation from the neighboring tubes. The aim of the present investigation is to study the effect of condensate inundation on ...
An experimental investigation of the flow and heat transfer characteristics in internal coolant passages of gas turbine airfoils has been conducted. The PIV method was employed for the flow measurements. A stereoscopic PIV system was used and automated. Th ...