Impact of negative bias on the piezoelectric properties through the incidence of abnormal oriented grains in Al0.62Sc0.38N thin films
Related publications (46)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The understanding of material self-assembling and self-organization mechanisms, at mesoscale, is crucial for nanotechnologies development. Such structures, hierarchically organized in superlattices or colloïdal crystals, are observed in inorganic or organo ...
This article presents a novel and robust approach for implementing ultra-low power MOS current mode logic (MCML) circuits. To operate at very low bias currents, a simple and compact high resistance load device has been introduced. Operating in subthreshold ...
The influence of the slow-light effect on the performance of distributed Brillouin sensors is studied. We show that, while in most situations it can be neglected, it may greatly affect the results obtained for certain experimental configurations. More spec ...
Microcrystalline hydrogenated silicon films (muc-Si:H) have been deposited by a high current DC plasma in argon-silane-hydrogen mixtures at growth rates up to 10 nm/s and at substrate temperatures below 500 degreesC. Scanning electron microscopy, X-ray dif ...
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
The microstructural properties of Ag thick-film contacts on P diffused [100] Si wafers are investigated. By transmission electron microscopy, the contact interface is ound to be composed of mostly 100-500 nm sized Ag crystallites penetrating into the si on ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
ZnO and AlN, which exhibit the wurtzite structure, were deposited onto metal coated SiO2 substrates by sputtering. X-ray diffraction (XRD) indicated that the films contained no second phases and exhibited an [0001] texture. Transmission electron microscopy ...
Structure and morphology of solid particles in precipitation from aqueous solutions correlate with formation (solution) conditions and thus reflect the growth mechanism. Calcium phosphate precipitation obtained from dilute aqueous solutions at room and bod ...