Publication

Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study

Related publications (61)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Toward an Understanding of Deformation Mechanisms in Metallic Lithium and Sodium from First-Principles

Anirudh Raju Natarajan

Metallic lithium and sodium are actively investigated as anodes for all solid-state batteries. While the mechanical properties of Li and Na remain poorly understood, there is a growing consensus that they play a crucial role in determining the integrity of ...

ACS2019

, ,

In this study, a miniaturized cruciform-shaped sample geometry which allows reaching high plastic strain under equibiaxial loading with reduced thickness at the test section is presented. The thinning method results in excellent surface quality that can be ...

SPRINGER2019

, ,

It is established that the annealing twin boundaries of austenite act as nucleation sites for the martensitic transformation. In the present study, we observe that in surface martensite the transformation only takes place for twin boundaries that are appro ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy

William Curtin, Céline Varvenne, Joël Bonneville

To reveal the operating mechanisms of plastic deformation in an FCC high-entropy alloy, the activation volumes in CrMnFeCoNi have been measured as a function of plastic strain and temperature between 77 K and 423 K using repeated load relaxation experiment ...

2018

Variant Selection in Fe-20Ni-1.8C under Bending

Roland Logé, Cyril Cayron, Annick Pauline Baur

Variant selection is commonly observed in martensitic steels when a stress is applied to the material during transformation. Classically, the selection phenomenon is modelled considering the work of the shape strain in the applied stress field. This shape ...

2018

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

Roland Logé

Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...

Springer Verlag2017

, ,

The stress-induced fcc-austenite to hcp-martensite transformation in the iron based shape memory alloy (SMA) Fe-17Mn-5Si-10Cr-4Ni with and without VC precipitates is investigated by in-situ neutron diffraction measurements upon uniaxial loading and unloadi ...

Elsevier Science Sa2017

In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...

2017

The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...

EPFL2017

, ,

A significant variant selection is reported in isothermal martensite formed on the surface of an Fe-30% Ni sample. The selection phenomenon is modelled using different descriptions of the martensitic phase transformation. In particular, matrices based on t ...

International Union of Crystallography2017