Validation of the BEAMS3D neutral beam deposition model on Wendelstein 7-X

Adnan Ali, Yu Gao, Jonathan Graves, Mike Machielsen, David Pfefferlé
IOP PUBLISHING LTD, 2020
Journal paper

Abstract

The neutral beam deposition model in the BEAMS3D code is validated against neutral beam attenuation data from Wendelstein 7-X (W7-X). A set of experimental discharges where the neutral beam injection system of W7-X was utilized were reconstructed. These discharges scanned the magnetic configurations and plasma densities of W7-X. The equilibrium reconstructions were performed using STELLOPT which calculates three-dimensional self-consistent ideal magnetohydrodynamic equilibria and kinetic profiles. These reconstructions leveraged new capabilities to incorporate electron cyclotron emission and x-ray imaging diagnostics in the STELLOPT code. The reconstructed equilibria and profiles served as inputs for BEAMS3D calculations of neutral beam deposition in W7-X. It is found that if reconstructed kinetic profiles are utilized, good agreement between measured and simulated beam attenuation is found. As deposition models provide initial conditions for fast-ion slowing down calculations, this work provides a first step towards validating our ability to predict fast ion confinement in stellarators.

Official source

https://infoscience.epfl.ch/record/278567?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Effects of collisionality and T e /T i on fluctuations in positive and negative δ tokamak plasmas

Stephan Brunner, Ajay Chandrarajan Jayalekshmi, Stefano Coda, Ambrogio Fasoli, Matteo Fontana, Gabriele Merlo, Laurie Porte, Olivier Sauter

The effects of negative triangularity () on confinement and fluctuations in plasmas covering a large range of parameters were investigated on the tokamak à configuration variable (TCV). The conditions explored in this paper include discharges where neutral beam (NB) heating was employed to obtain an electron-ion temperature ratio across a large fraction of the plasma profile. This significantly extended the range of negative plasmas studied on TCV towards conditions more relevant to future reactor-like tokamaks. Negative triangularity was found to improve confinement over the full range of collisionality studied () and (). The amplitude of radiative temperature fluctuations, measured using a correlation electron cyclotron emission diagnostic over the range , was found to be reduced, in negative with respect to positive plasmas, for all combinations of parameters explored. This was, in particular, verified for a pair of positive and negative plasmas with comparable density and under different conditions of NB heating. Linear gyrokinetic simulations found the dominant turbulence regime, in the strongly NB heated discharges, to be a mixture of trapped electron modes (TEMs) and ion temperature gradient driven modes. This is in contrast to ohmic or electron cyclotron heated discharges, for which the dominant turbulence regime was found to be pure TEM. Negative triangularity was found to lead to partial stabilization of the most unstable modes for low wavenumbers in both turbulence regimes. These findings demonstrate that negative triangularity could provide significant confinement improvement over a large range of parameters, that include conditions closer to future reactor-like machines (, low collisionality).

2019

Turbulence studies in TCV using the Correlation ECE diagnostic

Matteo Fontana

In this thesis work, the flexibility of the Tokamak à Configuration Variable (TCV) is exploited to study the influence of plasma parameters on turbulent fluctuations. The correlation electron cyclotron emission (CECE) diagnostic is used to measure low amplitude, large bandwidth radiative temperature fluctuations, associated with the anomalous transport terms that constitute the largest contribution to heat and particle loss in tokamak plasmas. In a series of L-mode limited plasmas, fluctuations are characterized over a large range of plasma parameters, obtained varying collisionality, Te/Ti and plasma triangularity. The influence of negative triangularity on confinement and fluctuations is also investigated. Temperature fluctuations profiles have been measured in low density, ohmic, positive and negative triangularity discharges, with matched current and density profiles. Strong suppression of fluctuations is observed in negative triangularity discharges from the plasma edge to the plasma mid radius. This is despite triangularity quickly decreasing when moving away from the edge. The existence of a region of low stiffness at the plasma edge is postulated to be responsible for this. Negative triangularity is confirmed having beneficial effects on confinement and reducing fluctuations amplitude in regimes with high Te/Ti. The neutral beam injector (NBI) has been used on positive and negative triangularity discharges in order to study the effect of negative triangularity on plasmas where Te/Ti~1. This condition is of particular interest since future reactor-like tokamaks are expected to work with thermalized electrons and ions. A pair of discharges with positive and negative triangularity has been realized, where matched temperature profiles are attained with ~385 kW and ~145 kW of NBI power respectively for the two shapes. This is evidence of negative triangularity improving plasma confinement also in conditions of low Te/Ti. In these discharges, CECE measurements find suppressed fluctuations in the negative triangularity discharges. Linear, flux tube, gyrokinetic simulations show that, in the same plasmas, the dominant turbulent regime is a mix of ion temperature gradient (ITG) instabilities and trapped electron modes (TEM). This is different with respect to all previous works in TCV, in which no ion heating had been available and only pure TEM regimes were observed. The results of the linear simulations indicate that, also in this mixed turbolence regime, negative triangularity has a stabilizing effect on instabilities, more visible for radial positions closer to the plasma edge, where the magnitude of triangularity is higher. A database of fluctuations measurements has been constructed from a series of discharges with positive and negative triangularity covering a large range of plasma conditions, particularly focusing on the effects of different combinations of collisionality and the Te/Ti ratio. Collisionality is found to be the main parameter to control the relative suppression of fluctutations in negative triangularity plasmas. No direct effect of Te/Ti on the fluctuation amplitudes is observed in the explored parameter range. Measurements taken in positive and negative triangularity plasmas, with comparable conditions and matched normalized temperature scale lengths still show reduced fluctuation levels for negative triangularity, suggesting influence on the threshold gradients for the onset of fluctuations.

EPFL2018

, ,

Fast ion confinement is crucial for the demonstration of the stellarator approach towards fu- sion energy. To study confinement of fast ions with today’s stellarators advanced RF heating schemes can be used to generate fast ions. Secondly, advanced RF heating schemes are de- veloped to improve ion heating performance. Advanced ICRH schemes (e.g. the 3-ion species scheme [1]) have the advantage of improved polarization, so the wave energy is nearly com- pletely carried by the left hand polarized wave at resonance, thereby providing good power transfer to the ions. However, modelling of minority and 3-ion species heating in W7-X has shown that the fast ion tails are limited, and core heating is modest [3]. Additionally, the highly anisotropic distributions generated by the minority and 3-ion species schemes are not well con- fined. Furthermore, the high density plasma of W7-X creates difficulty heating thermal particles because of the high collisionality. An advantage of the so called RF-NBI synergetic scheme is that NBI born ions are weakly collisional at birth. Secondly, compared to other ICRH schemes the RF-NBI scheme heats more in the parallel direction, generating less trapped ions. Thirdly, a more isotropic velocity distribution is also desirable for fast ion studies since fusion born alphas are isotropic as well [2, 3]. The code SCENIC [4] is used to model ICRH scenarios in 3D. The code is comprised of a magnetic equilibrium code, a full wave code and a Fokker-Planck code. It is able to determine wave propagation and absorption in hot plasma with full FLR effects. Lastly, effects of finite orbit width effects and wave absorption on the distribution function are taken into account. This contribution will explore RF-NBI and other advanced heating schemes in W7-X relevant plasma scenarios prior to ICRF heating and fast ion experiments. [1] Ye. O. Kazakov, D. Van Eester, R. Dumont and J. Ongena, Nucl. Fusion 55, 3 (2015) [2] H. Patten et al., in preparation of Phys. Rev. Lett (2019) [3] H. Patten, "Development and optimisation of advanced auxiliary ion heating schemes for 3D fusion plasma devices", EPFL, (2018) [4] M. Jucker, "Self-consistent ICRH distribution functions and equilibria in magnetically confined plasmas", EPFL, (2010)

European Physical Society2019

Turbulence studies in TCV using the Correlation ECE diagnostic

Matteo Fontana

EPFL2018

, ,

European Physical Society2019