Aqueous electrolytes for high-voltage batteries and supercapacitors

Lithium-ion batteries are widely implemented as energy storage devices due to their high energy density and low cost. They enabled modern portable electronics and electric ve-hicles, and are key to manage the integration of intermittent renewable electricity sources, such as solar and wind, into the power grid and decentralized microgrids. The use of flam-mable organic electrolytes however raises safety concerns, particularly for large-scale sta-tionary batteries. Furthermore, supply chain risks and the use of critical raw materials are a major challenge for the ongoing battery revolution. Aqueous electrolytes offer promising properties, as they are inherently non-flammable and potentially more cost effective. Combined with electrode materials based on abundant raw materials, aqueous batteries are among the most promising candidates to replace cur-rent battery chemistries relying on critical cobalt and flammable organic electrolytes. How-ever, due to the narrow electrochemical stability window of water (practically ca. 1.5 V), aqueous batteries have not yet met the energy density to be serious competitors to current lithium-ion battery technology. The goal of this thesis was to develop aqueous electrolytes with enhanced electrochem-ical stability, thus enabling new high-voltage cell chemistries. Exploring aqueous electrolytes with high salt concentrations, so-called water-in-salt electrolytes, we significantly increased the electrochemical stability and developed highly stable 2 V class aqueous sodium-ion bat-teries. Operating near the solubility limit of the electrolyte salt, crystallization turned out to be a major challenge for water-in-salt electrolytes. In this thesis, we demonstrated that add-ing highly asymmetric anions into the solution can effectively suppress crystallization, allow-ing stable operation of saturated electrolytes at temperatures as low as -10 °C. We further examined the impact of anion asymmetry on the local solution structure and dynamics using molecular dynamics simulations, relating the enhanced supercooling to sustained rotational motion of the asymmetric anion. Further, we demonstrate that the anion has a crucial impact on solution structure and cell performance. We establish that high salt concentration alone does not guarantee high-voltage stability and that due to the limited solubility of most sodium salts new approaches are needed. We provide guidelines for future work and the evaluation of experimental data in order to spur progress in the field of aqueous batteries.

Redox flow battery and indirect water electrolysis

Véronique Amstutz

The progressive integration of renewable energy sources such as wind turbines and photovoltaic pannels in the current electrical network, and the rise of the electrical mobility, provoke a change of paradigm in the sector of energy management. The increasing variability of the electricity production and consumption profiles, together with the requirement for a reliable supply of energy, necessitates the implementation of energy storage means of different scales and for a wide range of applications. Redox flow batteries (RFBs) are well adapted for buffering the fluctuations of solar or wind energy production. They present a fast response time, can withstand a large number of charge-discharge cycles and their ouput power is independant of their energy capacity. The main limitation of RFBs resides in their low energy density. The objective of the present work was to test a mean to overcome this low energy density. A new concept was developed, which rests on the addition of a second pathway to discharge the RFB. This pathway allows to generate hydrogen and oxygen, without affecting the functioning of the RFB. This concept was called dual-circuit RFB and was patented. RFBs are based on two liquids electrolytes, each stored in a reservoir, and flowing through an electrochemical cell for their electrochemical conversion. Each electrolyte contains one redox couple and Ce(IV)/Ce(III) and V(III)/V(II) were selected as positive and negative redox couples in the RFB developed here. Charge-discharge curves of a VâCe RFB were measured for characterisation purposes and for the preparation of the charged electrolytes. The latter ones can be discharged electrochemically in the RFB to generate electricity (electrochemical discharge mode), or they can be directed in a secondary circuit where they are discharged for the production of hydrogen or oxygen (chemical discharge mode). The chemical discharge of the negative electrolyte consists of the reaction of V(II) with protons to produce hydrogen and V(III). Mo2C was selected as heterogenous catalyst for the characterisation of the reaction. A conversion close to 100% suggested no loss of current. A kinetic analysis provided some insights into the catalytic mechanism of this reaction. The chemical discharge of the positive electrolyte aimed at the conversion of Ce(IV) to Ce(III) by the oxidation of water to oxygen and also necessitates a catalyst. Iridium dioxide (IrO2) and ruthenium dioxide (RuO2) were evaluated in terms of conversion and kinetics. The composition of the positive electrolyte was shown to be of importance for this reaction. To show the feasibility of this concept, a larger-scale demonstrator system was designed based on a 10 kW (40kWh) commercially available vanadium RFB. A characterisation of this RFB was first performed. The design a suitable Mo2C catalyst and its corresponding catalytic bed is also discussed. As a conclusion, the concept developed and experimentally tested in the present work leads to a RFB system which is characterised by two discharge modes, increasing its energy storage capacity and energy density. The dual-circuit RFB also represents a crossing between electrical grid and hydrogen mobility as the hydrogen produced by surplus electricity could be delivered to fuel cell cars. The application of this system in a local distribution electrical network, close to a wind or solar source seems a promising approach.

EPFL2015

Molecular insights in aqueous systems

Yixing Chen

The unique structure and dynamics of the water hydrogen (H)-bond network enable a multitude of structures and chemical reactions in both bulk solutions and at interfaces. The underlying molecular interactions between water and dissolved electrolytes, organic molecules, and nanoscale interfaces are difficult to study and hence not fully understood, especially when it involves interactions of length scales larger than one nanometer. In this thesis, we perform second order nonlinear light scattering experiments to investigate extended hydration shells (over one nanometer) and interfacial structures of buried aqueous interfaces that surround nanodroplets. We investigate the spatial range of ion-water interactions by probing the molecular structure of the water network in dilute electrolyte solutions. We find that electrolytes induce long-range, non-ion-specific orientational order in the H-bond network of water (over distances up to 70 hydration shells or 20 nm). These modifications in the water network start at electrolyte concentrations as low as 10 micromolar. The amount of induced orientational order and the concentration at which it occurs is different between light and heavy water. We link the observed ion induced changes in the bulk H-bond network of water to ion induced surface tension anomalies that occur in the same concentration range. We also study the same interactions in solutions with higher electrolyte concentrations focusing on cations. We observe specific ion effects in both the local charge distribution and water ordering in extended hydration shells of ions. Cations with larger charge densities induce larger changes in these two observables that follow a direct Hofmeister trend. The ion-induced structural changes in the water network are strongly correlated with the viscosity B-coefficient and hydration free energy of cations. These correlations facilitate constructing a better molecular model for specific ion effects in aqueous solutions. Next, we study the nanoscale hydrophobe/water interface and related interactions by probing the molecular structure of the interface formed with amphiphilic alkanols. We find that alkanols form a fluid film at the oil nanodroplet surface. Long chain alkanols show similar molecular structures and number densities at the interface. With increasing alkanol density, interfacial water loses its initial orientational alignment. The structure of interfacial oil molecules is more distorted for shorter alkanols. This interfacial structure differs significantly from those of macroscopic planar alkanol/water and alkanol/air interfaces and charged surfactant/oil/water interface, which can be explained by the balance between dispersive and H-bonding interactions. Finally, we develop a new membrane model system: 3D-lipid monolayers with tunable molecular structure on oil nanodroplets in water. This in-situ prepared system mimics the structure of lipid droplets in cells. The interfacial structure of lipids can be tuned from a tightly packed monolayer (liquid condensed phase) to a dilute one (liquid condensed/liquid expanded coexistence phase) by varying the lipid/oil/water ratio. The tunability of the chemical structure, the high surface-to-volume ratio, and the small sample volume make this system ideal for studies of molecular interactions of lipids in membranes.

EPFL2017

Alternative anode materials for methane oxidation in solid oxide fuel cells

Joseph Sfeir

Fuel Cells are electrochemical devices that are able to directly convert chemical energy to electrical energy, without any Carnot limitation. Hence, their energy efficiencies are relatively high. Among the various types of fuel cells, solid oxide fuel cells (SOFC) are operated at high temperatures and in principle can run on various fuels such as natural gas and hydrogen. As natural gas is sought to become one of the main fuels of the next decades, its direct feed to a SOFC is desirable as the reaction free energy is high CH4 + 2O2 = CO2 + 2H2O, ΔrG°800°C = -800.8kJ/mol At present, conventional SOFC are operated with pure hydrogen or partially to fully reformed natural gas implying an efficiency penalty. SOFC anodes are generally made of electrocatalytically active Ni-YSZ cermet. Pure CH4 is not fed directly to the anode, because of problems associated with the anode deactivation and coking as CH4 leads to the detachment of Ni particles from the YSZ support and their encapsulation by carbon. To overcome this problem, partially oxidized or reformed CH4 is used. For SOFCs running on direct CH4 feed, alternative anode materials to Ni-YSZ, or new anode formulations are necessary. However, in this case, several parameters influence the anode performance and stability. The anodes should withstand reduction at a low PO2 of around 10-24 atm, be compatible with the SOFC electrolyte, possess an acceptable conductivity and thermal expansion coefficient, and appropriate catalytic and electrocatalytic properties along with low coking activity. LaCrO3 and CeO2-based materials as well as some metal catalysts were studied here for their potential application as anodes in direct oxidation of CH4. This choice of materials was made as lanthanum chromite and ceria-based materials are mixed conductors known to resist quite well to the very reducing conditions in SOFC as they are commonly used for interconnect and electrolyte materials respectively. Moreover, these compounds possess some catalytic activity for CH4 activation and combustion. LaCrO3 and CeO2-based materials show rather low electrical conductivity (on the order of 1 S/cm in reducing conditions), necessitating the application of an extra material for proper current collection. Nevertheless, these oxides possess many of the stringent characteristics cited above. For SOFC anode purposes, LaCrO3-based compounds, substituted with Ca, Sr, Mg, Mn, Fe, Co and Ni, were synthesized by a modified citrate route from nitrate precursors. An optimal calcination temperature of 1100°C was found to be necessary to obtain XRD-pure yet sinteractive compounds. Conductivity measurements in air and in reducing atmospheres of 10-21 atm showed that the La A-site substituents (Ca and Sr) influenced the conductivity more than the Cr B-site substituents (Mg, Mn, Fe, Co and Ni). In humidifed H2, the total conductivity was maximally of 6.5 S/cm. Surface reaction with YSZ electrolyte was evidenced by SEM, XPS and SIMS, in reducing conditions, especially under current load, when these powders were applied as anodes. A current induced demixing effect was noted for heavily substituted LaCrO3. Ceria-based compounds, doped with Y, Nb, Pr and Gd, were synthesized through 3 different techniques: the solid-state method, coprecipitation and the NbCl5 route. The coprecipitation route was found to be most appropriate for Y, Pr and Gd, whereas for Nb a modified precipitation and the NbCl5 technique were the most efficient. Co-doping of Nb and Gd or Pr was studied in order to increase the electronic as well as the ionic conductivity in CeO2. Among all dopants, Nb was found to promote most the adhesion to YSZ electrolyte sheets. Adding Nb to Gd-doped ceria improved the electrode adhesion on YSZ sheets, but deteriorated its conductivity in oxidizing conditions. No interfacial reaction with YSZ was observed by HRTEM when Nb-doped ceria anodes were sintered on YSZ at 1200°C/4h. Catalytic measurements were undertaken with these materials in CH4 rich atmospheres. Different reaction mixtures were chosen to simulate the various SOFC operating conditions: partial oxidation, CO2 reforming by recycling and H2O reforming. Among the different elements, Sr and Ni were found to be the most active substituents for LaCrO3, as they promote all three types of reactions. The combination of both elements is favorable not only for catalytic use, but also for electrode application as they tend to increase the electronic conductivity of the material. Temperature programmed oxidation (TPO) and TEM made on the catalysts after runs in CH4, showed a very low carbon coverage over these oxides, except in the case of Fe substitution, over which carbon deposition was promoted. XPS analysis showed also that all B-site substituted compounds did not segregate after the catalytic runs whereas Ca and Sr (A-site substituents) tended to segregate in H2 and H2O rich atmospheres. Thermodynamic calculations, made using correlations developed in literature, show that Ca and Sr are expected to segregate in H2 and H2O rich atmospheres as they tend to form volatile hydroxyl species. Also, the thermodynamic stability of the LaCrO3 was observed to depend much on the substitution. For CeO2-based oxides, the activity for steam reforming increased from Nb

EPFL2002