A miniaturized selective laser melting device for operando X-ray diffraction studies
Related publications (34)
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The instrument VOLPE (volume photoemission from solids) is an experimental setup dedicated to high energy photoemission (PE) experiments. The instrument is equipped with an electrostatic hemispherical spectrometer especially designed to analyze high energy ...
Dose measurements based on methylene blue (MB) bleaching, widely used for ultraviolet light, can also be applied to X-rays including very high flux levels. This method has been tested by using both MB bleaching and Fricke dosimetry for a conventional monoc ...
The patented Nanoconverter is as planar flexure-based structure that attenuates linear movement amplitudes by a large constant reduction factor that can be chosen by design typically between 20 and 1000. It allows using conventional commercial actuators wi ...
The CLIC damping rings are designed to produce unprecedentedly low-emittances of 500 nm and 5 nm normalized at 2.86 GeV, in all beam dimensions with high bunch charge, necessary for the performance of the collider. The large beam brightness triggers a numb ...
Synchrotron radiation techniques represent powerful tools to characterize materials down to the nanometer level. This paper presents a survey of the state-of-the-art synchrotron-based techniques which are particularly well-suited for investigating material ...
This paper describes a new monochromator design for a bending magnet beamline of the Swiss Light Source synchrotron facility. The beamline optics is based on a horizontally deflecting spherical grating monochromator (SGM) with two gratings at a constant de ...
In the frame of the Generation IV initiative, different structural material candidates are investigated at the Paul Scherrer Institute. These are oxide dispersion strengthened (ODS) steels, intermetallic materials and ceramic composite materials. The respo ...
Nuclear Energy Agency, Organisation for Economic Co-operation and Development2007
We present recent results obtained with a novel spectrometer developed within the EU project VOLPE (VOLume PhotoEmission from solids with synchrotron radiation), now operational at ESRF (Beamline ID 16), where we were able to achieve high energy resolution ...
The structure of the hardening η′-phase precipitates in Al–Zn–Mg alloys has been investigated by using precession electron diffraction and X-ray synchrotron radiation diffraction. The latter was recorded as a three-dimensional, continuous intensity distrib ...
Synchrotron‐based X‐ray Tomographic Microscopy (SRXTM) is nowadays a powerful technique for non‐destructive, high‐resolution investigations of a broad kind of materials. High‐brilliance and high‐coherence third generation synchrotron radiation facilities a ...